All MIBs › CISCO-ATM-DUAL-PHY-MIB › cadpStatLineFEBErrors
cadpStatLineFEBErrors
Module: CISCO-ATM-DUAL-PHY-MIB
OID (symbolic): CISCO-ATM-DUAL-PHY-MIB::cadpStatLineFEBErrors
OID (numeric): 1.3.6.1.4.1.9.9.60.1.1.1.1.8
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The number of bits (binary 000 to 1000) in the previous BIP-8 that didn't match the even parity check are inserted by the transmitter. The receiver checks for this in the M0/M1 byte of the frame. A non-zero value (legal range is binary 0000 - 1000) indicates a line layer error in the remote end. Any other value is treated as no error.
Count of Line Far End Bit Errors (FEBE) on this phy.
What is cadpStatLineFEBErrors?
Counts Line Far-End Block (FEB) error indications reported by the remote end via the M0/M1 byte, signaling line-layer errors detected at the far end of the ATM link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.60.1.1.1.1.8 snmpwalk -v2c -c public <target> CISCO-ATM-DUAL-PHY-MIB::cadpStatLineFEBErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.60.1.1.1.1.8.1 snmpget -v2c -c public <target> CISCO-ATM-DUAL-PHY-MIB::cadpStatLineFEBErrors.1
Start monitoring Cisco router/switch with redundant ATM PHY line cards with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-DUAL-PHY-MIB::cadpStatLineFEBErrors OID value, configure state conditions and alerts, and monitor any Cisco router/switch with redundant ATM PHY line cards from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.60 | ciscoAtmDualPhyMIB | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1 | ciscoAtmDualPhyMIBObjects | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1 | cadpStatistics | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1 | cadpStatTable | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1.1 | cadpStatEntry | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.8 | cadpStatLineFEBErrors | CISCO-ATM-DUAL-PHY-MIB |