All MIBs › CISCO-ATM-DUAL-PHY-MIB › cadpStatLineBIP824Errors
cadpStatLineBIP824Errors
Module: CISCO-ATM-DUAL-PHY-MIB
OID (symbolic): CISCO-ATM-DUAL-PHY-MIB::cadpStatLineBIP824Errors
OID (numeric): 1.3.6.1.4.1.9.9.60.1.1.1.1.7
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The Bit Interleaved Parity 8/24 is an error checking code based on even parity. The calculated BIP code for frame N is compared with the BIP-8/24 code extracted from the B2 byte(s) of frame N+1. Any differences indicate that a line layer bit error has occurred.
Count of line bit interleaved partiy (BIP-8/24) errors on this phy.
What is cadpStatLineBIP824Errors?
Counts Line-layer BIP-8/24 parity errors detected by comparing the calculated parity of one frame against the parity code carried in the next frame, indicating line-layer bit errors.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.60.1.1.1.1.7 snmpwalk -v2c -c public <target> CISCO-ATM-DUAL-PHY-MIB::cadpStatLineBIP824Errors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.60.1.1.1.1.7.1 snmpget -v2c -c public <target> CISCO-ATM-DUAL-PHY-MIB::cadpStatLineBIP824Errors.1
Start monitoring Cisco router/switch with redundant ATM PHY line cards with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-DUAL-PHY-MIB::cadpStatLineBIP824Errors OID value, configure state conditions and alerts, and monitor any Cisco router/switch with redundant ATM PHY line cards from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.60 | ciscoAtmDualPhyMIB | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1 | ciscoAtmDualPhyMIBObjects | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1 | cadpStatistics | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1 | cadpStatTable | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1.1 | cadpStatEntry | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.7 | cadpStatLineBIP824Errors | CISCO-ATM-DUAL-PHY-MIB |