All MIBs › CISCO-ATM-DUAL-PHY-MIB › cadpStatCorrectableHCSErrors
cadpStatCorrectableHCSErrors
Module: CISCO-ATM-DUAL-PHY-MIB
OID (symbolic): CISCO-ATM-DUAL-PHY-MIB::cadpStatCorrectableHCSErrors
OID (numeric): 1.3.6.1.4.1.9.9.60.1.1.1.1.11
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The Header Checksum (HCS) is a CRC-8 calculation over the first 4 octets of the ATM cell header. The received HCS is verified using the polynomial x^8 + x^2 + x + 1. The coset polynomial x^6 + x^4 + x^2 + 1, is added (modulo 2) to the received HCS octet before comparison with the calculated result. Cells with single bit error in the HCS byte are corrected. Cells with more than one bit error in the HCS byte are uncorrectable.
Count of incoming cells on this phy with single bit error in the Header Checksum (HCS) byte
What is cadpStatCorrectableHCSErrors?
Counts ATM cell Header Checksum (HCS) errors that were correctable, based on a CRC-8 check over the cell header.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.60.1.1.1.1.11 snmpwalk -v2c -c public <target> CISCO-ATM-DUAL-PHY-MIB::cadpStatCorrectableHCSErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.60.1.1.1.1.11.1 snmpget -v2c -c public <target> CISCO-ATM-DUAL-PHY-MIB::cadpStatCorrectableHCSErrors.1
Start monitoring Cisco router/switch with redundant ATM PHY line cards with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-DUAL-PHY-MIB::cadpStatCorrectableHCSErrors OID value, configure state conditions and alerts, and monitor any Cisco router/switch with redundant ATM PHY line cards from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.60 | ciscoAtmDualPhyMIB | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1 | ciscoAtmDualPhyMIBObjects | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1 | cadpStatistics | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1 | cadpStatTable | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1.1 | cadpStatEntry | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.11 | cadpStatCorrectableHCSErrors | CISCO-ATM-DUAL-PHY-MIB |