All MIBs › CISCO-ATM-DUAL-PHY-MIB › cadpStatActive
cadpStatActive
Module: CISCO-ATM-DUAL-PHY-MIB
OID (symbolic): CISCO-ATM-DUAL-PHY-MIB::cadpStatActive
OID (numeric): 1.3.6.1.4.1.9.9.60.1.1.1.1.5
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-only
Description: Set to true when this phy is currently the active phy. Set to false when this phy is not the currently active phy.
What is cadpStatActive?
This flag is set true for whichever of the two redundant phys is currently the one actually forwarding ATM cells. Because only one phy can be live at a time, this is the object that tells an admin which physical port is actually carrying traffic right now, independent of which one is administratively preferred, and the two can briefly disagree immediately after a failover. Phy 1 showing active true and phy 2 showing active false right after an APS switchover triggered by phy 2's loss-of-signal alarm is the expected post-failover state.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.60.1.1.1.1.5 snmpwalk -v2c -c public <target> CISCO-ATM-DUAL-PHY-MIB::cadpStatActive
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.60.1.1.1.1.5.1 snmpget -v2c -c public <target> CISCO-ATM-DUAL-PHY-MIB::cadpStatActive.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cadpStatActive.1
Start monitoring Cisco router/switch with redundant ATM PHY line cards with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-DUAL-PHY-MIB::cadpStatActive OID value, configure state conditions and alerts, and monitor any Cisco router/switch with redundant ATM PHY line cards from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.60 | ciscoAtmDualPhyMIB | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1 | ciscoAtmDualPhyMIBObjects | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1 | cadpStatistics | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1 | cadpStatTable | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1.1 | cadpStatEntry | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.5 | cadpStatActive | CISCO-ATM-DUAL-PHY-MIB |