All MIBs › CISCO-AON-STATUS-MIB › caonNotifEnableIndicators
caonNotifEnableIndicators
Module: CISCO-AON-STATUS-MIB
OID (symbolic): CISCO-AON-STATUS-MIB::caonNotifEnableIndicators
OID (numeric): 1.3.6.1.4.1.9.9.646.1.2.8
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: This object specifies whether the SNMP notifications will or will not be sent.
If the 'caonUpNotifEnabled' bit is set, then caonUp notification will be sent when AON data plane bootstraps successfully. If the 'caonUpNotifEnabled' bit is not set, caonUp notification will not be sent.
If the 'caonDownNotifEnabled' bit is set, then caonDown notification will be sent when the AON data plane goes down. If the 'caonDownNotifEnabled' bit is not set, caonDown notification will not be sent.
If the 'caonNewPepDeployedNotifEnabled' bit is set, then caonNewPepDeployed notification will be sent when a new PEP is deployed successfully after AON bootstrap. If the 'caonNewPepDeployedNotifEnabled' bit is not set, caonNewPepDeployed notification will not be sent.
If the 'caonMessageDeliveryFailedNotifEnabled' bit is set, then caonMessageDeliveryFailed notification will be sent when a message cannot be delivered to the end point. If the 'caonMessageDeliveryFailedNotifEnabled' bit is not set, caonMessageDeliveredFailed notification will not be sent.
If the 'caonSendResponseThresholdExceededNotifEnabled' bit is set, then caonSendResponseThresholdExceeded notification will be sent when the end point response time exceeds the threshold value specified in Send Bladelet. If the bit 'caonSendResponseThresholdExceededNotifEnabled' is not set, caonSendResponseThresholdExceeded notification will not be sent.
If the 'caonCustomNotifEnabled' bit is set, caonCustomNotification will be sent. If the 'caonCustomNotifEnabled' bit is not set, caonCustomNotification will not be sent.
What is caonNotifEnableIndicators?
A read-write bitmap that enables or disables specific SNMP notifications, such as the caonUp notification sent when the AON data plane successfully bootstraps.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.646.1.2.8 snmpwalk -v2c -c public <target> CISCO-AON-STATUS-MIB::caonNotifEnableIndicators
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.646.1.2.8.1 snmpget -v2c -c public <target> CISCO-AON-STATUS-MIB::caonNotifEnableIndicators.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.646.1.2.8.1 s <value>
Start monitoring Cisco AON (Application-Oriented Networking) module (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-AON-STATUS-MIB::caonNotifEnableIndicators OID value, configure state conditions and alerts, and monitor any Cisco AON (Application-Oriented Networking) module (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.646 | ciscoAonStatusMIB | CISCO-AON-STATUS-MIB |
| 1.3.6.1.4.1.9.9.646.1 | ciscoAonStatusMIBObjects | CISCO-AON-STATUS-MIB |
| 1.3.6.1.4.1.9.9.646.1.2 | caonNotificationInfo | CISCO-AON-STATUS-MIB |
| 1.3.6.1.4.1.9.9.646.1.2.8 | caonNotifEnableIndicators | CISCO-AON-STATUS-MIB |