CIENA-CES-PM :: cienaCesPmIGMPTotalStatsBinIgmpnumResourceExceed

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-PMcienaCesPmIGMPTotalStatsBinIgmpnumResourceExceed

cienaCesPmIGMPTotalStatsBinIgmpnumResourceExceed

Module: CIENA-CES-PM

OID (symbolic): CIENA-CES-PM::cienaCesPmIGMPTotalStatsBinIgmpnumResourceExceed

OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.3.7.1.17

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The total number of IGMP packets discarded because there were not enough resources to process these messages. This could happen when the rate of the incoming IGMP messages is very high.

What is cienaCesPmIGMPTotalStatsBinIgmpnumResourceExceed?

This is the lifetime running total of IGMP packets the switch has ever dropped due to insufficient IGMP-processing resources, accumulated in the TotalStatsBin independent of any interval boundary. Because resource-exceed events typically cluster around specific high-load incidents such as mass channel changes or multicast storms, a lifetime total that jumps sharply between two polls -- rather than climbing steadily -- points an operator toward correlating that jump with a specific past event, like a network-wide reboot causing simultaneous re-joins. For instance, a jump of several thousand in a single day likely coincides with a service-wide outage and recovery rather than everyday traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.3.7.1.17
snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmIGMPTotalStatsBinIgmpnumResourceExceed

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.3.7.1.17.1
snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmIGMPTotalStatsBinIgmpnumResourceExceed.1

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmIGMPTotalStatsBinIgmpnumResourceExceed OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.3cienaCesStatisticsCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.3.1cienaCesPmMibCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2cienaCesPmMIBObjectsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3cienaCesPmStatisticsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.3cienaCesPmIgmpStatsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.3.7cienaCesPmIGMPTotalStatisticsBinTableCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.3.7.1cienaCesPmIGMPTotalStatisticsBinEntryCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.3.7.1.17cienaCesPmIGMPTotalStatsBinIgmpnumResourceExceedCIENA-CES-PM