CIENA-CES-PM :: cienaCesPmIGMPCurrBinIgmpnumQueryDiscardsLiNoServerLI

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-PMcienaCesPmIGMPCurrBinIgmpnumQueryDiscardsLiNoServerLI

cienaCesPmIGMPCurrBinIgmpnumQueryDiscardsLiNoServerLI

Module: CIENA-CES-PM

OID (symbolic): CIENA-CES-PM::cienaCesPmIGMPCurrBinIgmpnumQueryDiscardsLiNoServerLI

OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.12

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The total query discarded because of no server logical interfaces.

What is cienaCesPmIGMPCurrBinIgmpnumQueryDiscardsLiNoServerLI?

This read-only Counter64 counts queries discarded because there was no server-side logical interface configured to relay them. A running count on a subscriber-facing port usually points to an incomplete multicast/IGMP-proxy configuration on that logical interface rather than an actual traffic problem; because it is drawn from this table's currently-accumulating, short-interval bin, it reflects only the last few minutes of activity, so it's the value to watch for a fast-forming problem rather than a long-term trend. On an uplink toward the multicast-enabled core router, a count of 3,087 over the last 15 minutes is the kind of number an admin would trend against the join/leave rate on the same port to judge whether it's normal channel-surfing or an anomaly worth a closer look.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.12
snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmIGMPCurrBinIgmpnumQueryDiscardsLiNoServerLI

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.12.1
snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmIGMPCurrBinIgmpnumQueryDiscardsLiNoServerLI.1

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmIGMPCurrBinIgmpnumQueryDiscardsLiNoServerLI OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.3cienaCesStatisticsCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.3.1cienaCesPmMibCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2cienaCesPmMIBObjectsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3cienaCesPmStatisticsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.3cienaCesPmIgmpStatsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.3.2cienaCesPmIGMPCurrBinTableCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1cienaCesPmIGMPCurrBinEntryCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.12cienaCesPmIGMPCurrBinIgmpnumQueryDiscardsLiNoServerLICIENA-CES-PM