All MIBs › CIENA-CES-PM › cienaCesPmIGMPCurr24HBinIgmpnumResourceExceed
cienaCesPmIGMPCurr24HBinIgmpnumResourceExceed
Module: CIENA-CES-PM
OID (symbolic): CIENA-CES-PM::cienaCesPmIGMPCurr24HBinIgmpnumResourceExceed
OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.21
Node type: OBJECT-TYPE
Type: Counter64
Access: read-only
Description: The total number of IGMP packets discarded because there were not enough resources to process these messages. This could happen when the rate of the incoming IGMP messages is very high.
What is cienaCesPmIGMPCurr24HBinIgmpnumResourceExceed?
This read-only Counter64 counts IGMP packets dropped because the switch ran out of internal resources to process them. This is the counter that shows real control-plane overload — sustained increases mean the incoming IGMP message rate on this instance is outrunning the snooping/proxy engine's capacity, the first symptom of an IGMP flood; because it is drawn from the current, still-open 24-hour bin for today, the number keeps climbing until midnight rollover, so it should be read as "so far today" rather than a finished daily total. On an access port serving a multi-dwelling unit, a count of 1,190 over today so far is the kind of number an admin would trend against the join/leave rate on the same port to judge whether it's normal channel-surfing or an anomaly worth a closer look.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.21 snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmIGMPCurr24HBinIgmpnumResourceExceed
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.21.1 snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmIGMPCurr24HBinIgmpnumResourceExceed.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cienaCesPmIGMPCurr24HBinIgmpnumResourceExceed.1
Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmIGMPCurr24HBinIgmpnumResourceExceed OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1271 | ciena | CIENA-SMI |
| 1.3.6.1.4.1.1271.2 | cienaCes | CIENA-SMI |
| 1.3.6.1.4.1.1271.2.3 | cienaCesStatistics | CIENA-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1271.2.3.1 | cienaCesPmMib | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2 | cienaCesPmMIBObjects | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3 | cienaCesPmStatistics | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.3 | cienaCesPmIgmpStats | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.3.3 | cienaCesPmIGMPCurr24HBinTable | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1 | cienaCesPmIGMPCurr24HBinEntry | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.21 | cienaCesPmIGMPCurr24HBinIgmpnumResourceExceed | CIENA-CES-PM |