All MIBs › CIENA-CES-PM › cienaCesPmExtendedTxRxHistoryBinTx4096To9216OctsPkts
cienaCesPmExtendedTxRxHistoryBinTx4096To9216OctsPkts
Module: CIENA-CES-PM
OID (symbolic): CIENA-CES-PM::cienaCesPmExtendedTxRxHistoryBinTx4096To9216OctsPkts
OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.60
Node type: OBJECT-TYPE
Type: Counter64
Access: read-only
Description: The total number of packets (including bad packets) transmitted that were between 4096 and 9216 octets in length inclusive (excluding framing bits but including FCS octets).
What is cienaCesPmExtendedTxRxHistoryBinTx4096To9216OctsPkts?
This counts frames transmitted on this interface whose length fell between 4096 and 9216 octets (excluding framing bits but including the FCS). This bucket is a jumbo-frame bucket, so this bucket only fills up if jumbo frames are actually enabled end-to-end on this interface -- otherwise a nonzero count here on a port not provisioned for jumbo frames is itself the anomaly, so watching it for this row in the rolling short-interval history table on this specific port turns a raw byte counter into a distribution an admin can actually read for anomalies. For example, jumbo frames enabled on one side of this link but not the other would show up as this bucket unexpectedly incrementing for this historical short-interval bin on this exact port, without needing a packet capture to confirm it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.60 snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmExtendedTxRxHistoryBinTx4096To9216OctsPkts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.60.1 snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmExtendedTxRxHistoryBinTx4096To9216OctsPkts.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cienaCesPmExtendedTxRxHistoryBinTx4096To9216OctsPkts.1
Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmExtendedTxRxHistoryBinTx4096To9216OctsPkts OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1271 | ciena | CIENA-SMI |
| 1.3.6.1.4.1.1271.2 | cienaCes | CIENA-SMI |
| 1.3.6.1.4.1.1271.2.3 | cienaCesStatistics | CIENA-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1271.2.3.1 | cienaCesPmMib | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2 | cienaCesPmMIBObjects | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3 | cienaCesPmStatistics | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.1 | cienaCesPmExtendedTxRxStats | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.1.1 | cienaCesPmExtendedTxRxHistoryBinTable | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1 | cienaCesPmExtendedTxRxHistoryBinEntry | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.60 | cienaCesPmExtendedTxRxHistoryBinTx4096To9216OctsPkts | CIENA-CES-PM |