CIENA-CES-PM :: cienaCesPmExtendedTxRxHistoryBinTx256To511OctsPkts

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-PMcienaCesPmExtendedTxRxHistoryBinTx256To511OctsPkts

cienaCesPmExtendedTxRxHistoryBinTx256To511OctsPkts

Module: CIENA-CES-PM

OID (symbolic): CIENA-CES-PM::cienaCesPmExtendedTxRxHistoryBinTx256To511OctsPkts

OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.55

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The total number of packets (including bad packets) transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).

What is cienaCesPmExtendedTxRxHistoryBinTx256To511OctsPkts?

This counts frames transmitted on this interface whose length fell between 256 and 511 octets (excluding framing bits but including the FCS). This bucket is a mid-size bucket that usually holds a mix of small application-layer requests and lightly padded control traffic on this interface, so watching it for this row in the rolling short-interval history table on this specific port turns a raw byte counter into a distribution an admin can actually read for anomalies. For example, a burst of DNS or small HTTP request/response traffic would show up as a shift toward this bucket for this historical short-interval bin on this exact port, without needing a packet capture to confirm it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.55
snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmExtendedTxRxHistoryBinTx256To511OctsPkts

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.55.1
snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmExtendedTxRxHistoryBinTx256To511OctsPkts.1

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmExtendedTxRxHistoryBinTx256To511OctsPkts OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.3cienaCesStatisticsCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.3.1cienaCesPmMibCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2cienaCesPmMIBObjectsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3cienaCesPmStatisticsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.1cienaCesPmExtendedTxRxStatsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.1.1cienaCesPmExtendedTxRxHistoryBinTableCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1cienaCesPmExtendedTxRxHistoryBinEntryCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.55cienaCesPmExtendedTxRxHistoryBinTx256To511OctsPktsCIENA-CES-PM