CIENA-CES-PM :: cienaCesPmExtendedTxRxHistoryBinOversizePkts

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-PMcienaCesPmExtendedTxRxHistoryBinOversizePkts

cienaCesPmExtendedTxRxHistoryBinOversizePkts

Module: CIENA-CES-PM

OID (symbolic): CIENA-CES-PM::cienaCesPmExtendedTxRxHistoryBinOversizePkts

OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.13

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The total number of packets received that were longer than 1518 octets but less than or equal to the MTU (excluding framing bits, but including FCS octets) and were otherwise well formed.

What is cienaCesPmExtendedTxRxHistoryBinOversizePkts?

This read-only Counter64 records the total number of well-formed packets received that were longer than 1518 octets but within the port's MTU, per its description, during this bin's collection period. Because these frames are otherwise valid, not corrupted, just larger than the classic Ethernet maximum, this counter typically reflects legitimate jumbo-frame traffic when jumbo frames are enabled, rather than an error condition, so a rising count here is only concerning if jumbo frames aren't expected on that port. An engineer verifying that a newly-enabled jumbo-frame configuration is actually being used by end devices would check this bin's oversize count to confirm larger-than-1518-byte frames are indeed passing through.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.13
snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmExtendedTxRxHistoryBinOversizePkts

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.13.1
snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmExtendedTxRxHistoryBinOversizePkts.1

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmExtendedTxRxHistoryBinOversizePkts OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.3cienaCesStatisticsCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.3.1cienaCesPmMibCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2cienaCesPmMIBObjectsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3cienaCesPmStatisticsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.1cienaCesPmExtendedTxRxStatsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.1.1cienaCesPmExtendedTxRxHistoryBinTableCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1cienaCesPmExtendedTxRxHistoryBinEntryCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.13cienaCesPmExtendedTxRxHistoryBinOversizePktsCIENA-CES-PM