CIENA-CES-PM :: cienaCesPmExtendedTxRxHistoryBinFragmentsPkts

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-PMcienaCesPmExtendedTxRxHistoryBinFragmentsPkts

cienaCesPmExtendedTxRxHistoryBinFragmentsPkts

Module: CIENA-CES-PM

OID (symbolic): CIENA-CES-PM::cienaCesPmExtendedTxRxHistoryBinFragmentsPkts

OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.14

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).

What is cienaCesPmExtendedTxRxHistoryBinFragmentsPkts?

This read-only Counter64 records the total number of packets received that were both undersized, under 64 octets, and carried a bad FCS, per its description, marking them as genuinely corrupted fragments rather than simply small-but-valid frames, which would instead count as UndersizePkts. This distinguishes a link or device actively producing malformed, broken frames from one merely sending legitimately small but well-formed traffic, which is an important distinction when diagnosing the root cause of receive errors during this bin's window. An engineer seeing a rise in this counter, as opposed to UndersizePkts, would suspect an actual physical-layer or NIC fault generating corrupt fragments rather than a benign non-standard traffic pattern.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.14
snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmExtendedTxRxHistoryBinFragmentsPkts

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.14.1
snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmExtendedTxRxHistoryBinFragmentsPkts.1

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmExtendedTxRxHistoryBinFragmentsPkts OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.3cienaCesStatisticsCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.3.1cienaCesPmMibCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2cienaCesPmMIBObjectsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3cienaCesPmStatisticsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.1cienaCesPmExtendedTxRxStatsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.1.1cienaCesPmExtendedTxRxHistoryBinTableCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1cienaCesPmExtendedTxRxHistoryBinEntryCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.14cienaCesPmExtendedTxRxHistoryBinFragmentsPktsCIENA-CES-PM