All MIBs › CIENA-CES-PM › cienaCesPmExtendedTxRxCurrBinTx2048To4095OctsPkts
cienaCesPmExtendedTxRxCurrBinTx2048To4095OctsPkts
Module: CIENA-CES-PM
OID (symbolic): CIENA-CES-PM::cienaCesPmExtendedTxRxCurrBinTx2048To4095OctsPkts
OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.57
Node type: OBJECT-TYPE
Type: Counter64
Access: read-only
Description: The total number of packets (including bad packets) transmitted that were between 2048 and 4095 octets in length inclusive (excluding framing bits but including FCS octets).
What is cienaCesPmExtendedTxRxCurrBinTx2048To4095OctsPkts?
This counts frames transmitted on this interface whose length fell between 2048 and 4095 octets (excluding framing bits but including the FCS). This bucket is a jumbo-frame bucket, so this bucket only fills up if jumbo frames are actually enabled end-to-end on this interface -- otherwise a nonzero count here on a port not provisioned for jumbo frames is itself the anomaly, so watching it for the current, still-accumulating short interval bin on this specific port turns a raw byte counter into a distribution an admin can actually read for anomalies. For example, jumbo frames enabled on one side of this link but not the other would show up as this bucket unexpectedly incrementing for this in-progress short-interval bin on this exact port, without needing a packet capture to confirm it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.57 snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmExtendedTxRxCurrBinTx2048To4095OctsPkts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.57.1 snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmExtendedTxRxCurrBinTx2048To4095OctsPkts.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cienaCesPmExtendedTxRxCurrBinTx2048To4095OctsPkts.1
Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmExtendedTxRxCurrBinTx2048To4095OctsPkts OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1271 | ciena | CIENA-SMI |
| 1.3.6.1.4.1.1271.2 | cienaCes | CIENA-SMI |
| 1.3.6.1.4.1.1271.2.3 | cienaCesStatistics | CIENA-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1271.2.3.1 | cienaCesPmMib | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2 | cienaCesPmMIBObjects | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3 | cienaCesPmStatistics | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.1 | cienaCesPmExtendedTxRxStats | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.1.2 | cienaCesPmExtendedTxRxCurrBinTable | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1 | cienaCesPmExtendedTxRxCurrBinEntry | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.57 | cienaCesPmExtendedTxRxCurrBinTx2048To4095OctsPkts | CIENA-CES-PM |