CIENA-CES-PM :: cienaCesPmExtendedTxRxCurrBinTx1519To2047OctsPkts

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-PMcienaCesPmExtendedTxRxCurrBinTx1519To2047OctsPkts

cienaCesPmExtendedTxRxCurrBinTx1519To2047OctsPkts

Module: CIENA-CES-PM

OID (symbolic): CIENA-CES-PM::cienaCesPmExtendedTxRxCurrBinTx1519To2047OctsPkts

OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.56

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The total number of packets (including bad packets) transmitted that were between 1519 and 2047 octets in length inclusive (excluding framing bits but including FCS octets).

What is cienaCesPmExtendedTxRxCurrBinTx1519To2047OctsPkts?

This counts frames transmitted on this interface whose length fell between 1519 and 2047 octets (excluding framing bits but including the FCS). This bucket is a jumbo-frame bucket, so this bucket only fills up if jumbo frames are actually enabled end-to-end on this interface -- otherwise a nonzero count here on a port not provisioned for jumbo frames is itself the anomaly, so watching it for the current, still-accumulating short interval bin on this specific port turns a raw byte counter into a distribution an admin can actually read for anomalies. For example, jumbo frames enabled on one side of this link but not the other would show up as this bucket unexpectedly incrementing for this in-progress short-interval bin on this exact port, without needing a packet capture to confirm it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.56
snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmExtendedTxRxCurrBinTx1519To2047OctsPkts

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.56.1
snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmExtendedTxRxCurrBinTx1519To2047OctsPkts.1

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmExtendedTxRxCurrBinTx1519To2047OctsPkts OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.3cienaCesStatisticsCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.3.1cienaCesPmMibCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2cienaCesPmMIBObjectsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3cienaCesPmStatisticsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.1cienaCesPmExtendedTxRxStatsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.1.2cienaCesPmExtendedTxRxCurrBinTableCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1cienaCesPmExtendedTxRxCurrBinEntryCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.56cienaCesPmExtendedTxRxCurrBinTx1519To2047OctsPktsCIENA-CES-PM