CIENA-CES-PM :: cienaCesPmBasicTxRxBiDirTotalStatsBinRevTxFramesPerSec

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-PMcienaCesPmBasicTxRxBiDirTotalStatsBinRevTxFramesPerSec

cienaCesPmBasicTxRxBiDirTotalStatsBinRevTxFramesPerSec

Module: CIENA-CES-PM

OID (symbolic): CIENA-CES-PM::cienaCesPmBasicTxRxBiDirTotalStatsBinRevTxFramesPerSec

OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.12.6.1.25

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The number of reverse tunnel frames transmitted per second on this PM instance.

What is cienaCesPmBasicTxRxBiDirTotalStatsBinRevTxFramesPerSec?

This Counter64 field reports the frames transmitted per second on the reverse direction of this bidirectional CES tunnel, as computed for this PM instance. Because this TotalStats row has neither a clear-time nor a Duration/State field — it is the true lifetime, never-reset total for this PM instance since it was provisioned, and this specific field is an instantaneous computed rate of transmitted egress traffic rather than a running total, so a spike here shows up the moment it happens rather than only after the interval ends, it is the field to check when you need to see the reverse-direction egress throughput of the tunnel right now rather than a cumulative volume. For example, this counter might read 8,267 frames/sec during the lifetime of this PM instance — if that number spikes on the reverse side while the opposite direction stays flat, it flags an asymmetric load or fault specific to that leg of the tunnel.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.12.6.1.25
snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicTxRxBiDirTotalStatsBinRevTxFramesPerSec

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.12.6.1.25.1
snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicTxRxBiDirTotalStatsBinRevTxFramesPerSec.1

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmBasicTxRxBiDirTotalStatsBinRevTxFramesPerSec OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.3cienaCesStatisticsCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.3.1cienaCesPmMibCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2cienaCesPmMIBObjectsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3cienaCesPmStatisticsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12cienaCesPmBasicTxRxBiDirStatsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.6cienaCesPmBasicTxRxBiDirTotalStatisticsBinTableCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.6.1cienaCesPmBasicTxRxBiDirTotalStatisticsBinEntryCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.6.1.25cienaCesPmBasicTxRxBiDirTotalStatsBinRevTxFramesPerSecCIENA-CES-PM