All MIBs › CIENA-CES-PM › cienaCesPmBasicTxRxBiDirTotalStatsBinRevRxFramesPerSec
cienaCesPmBasicTxRxBiDirTotalStatsBinRevRxFramesPerSec
Module: CIENA-CES-PM
OID (symbolic): CIENA-CES-PM::cienaCesPmBasicTxRxBiDirTotalStatsBinRevRxFramesPerSec
OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.12.6.1.23
Node type: OBJECT-TYPE
Type: Counter64
Access: read-only
Description: The number of reverse tunnel frames received per second on this PM instance.
What is cienaCesPmBasicTxRxBiDirTotalStatsBinRevRxFramesPerSec?
This Counter64 field reports the frames received per second on the reverse direction of this bidirectional CES tunnel, as computed for this PM instance. Because this TotalStats row has neither a clear-time nor a Duration/State field — it is the true lifetime, never-reset total for this PM instance since it was provisioned, and this specific field is an instantaneous computed rate of accepted ingress traffic rather than a running total, so it reacts immediately to a burst instead of waiting for a bin to close, it is the field to check when you need to see the reverse-direction ingress throughput of the tunnel right now rather than a cumulative volume. For example, this counter might read 8,193 frames/sec during the lifetime of this PM instance — if that number spikes on the reverse side while the opposite direction stays flat, it flags an asymmetric load or fault specific to that leg of the tunnel.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.12.6.1.23 snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicTxRxBiDirTotalStatsBinRevRxFramesPerSec
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.12.6.1.23.1 snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicTxRxBiDirTotalStatsBinRevRxFramesPerSec.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cienaCesPmBasicTxRxBiDirTotalStatsBinRevRxFramesPerSec.1
Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmBasicTxRxBiDirTotalStatsBinRevRxFramesPerSec OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1271 | ciena | CIENA-SMI |
| 1.3.6.1.4.1.1271.2 | cienaCes | CIENA-SMI |
| 1.3.6.1.4.1.1271.2.3 | cienaCesStatistics | CIENA-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1271.2.3.1 | cienaCesPmMib | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2 | cienaCesPmMIBObjects | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3 | cienaCesPmStatistics | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.12 | cienaCesPmBasicTxRxBiDirStats | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.12.6 | cienaCesPmBasicTxRxBiDirTotalStatisticsBinTable | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.12.6.1 | cienaCesPmBasicTxRxBiDirTotalStatisticsBinEntry | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.12.6.1.23 | cienaCesPmBasicTxRxBiDirTotalStatsBinRevRxFramesPerSec | CIENA-CES-PM |