CIENA-CES-PM :: cienaCesPmBasicTxRxBiDirStatsBinRevRxFramesPerSec

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-PMcienaCesPmBasicTxRxBiDirStatsBinRevRxFramesPerSec

cienaCesPmBasicTxRxBiDirStatsBinRevRxFramesPerSec

Module: CIENA-CES-PM

OID (symbolic): CIENA-CES-PM::cienaCesPmBasicTxRxBiDirStatsBinRevRxFramesPerSec

OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.12.5.1.24

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The number of reverse tunnel frames received per second on this PM instance.

What is cienaCesPmBasicTxRxBiDirStatsBinRevRxFramesPerSec?

This Counter64 field reports the frames received per second on the reverse direction of this bidirectional CES tunnel, as computed for this PM instance. Because this Stats row carries no Duration or State field at all, unlike the Curr/History bins — it is a running tally since the last manual clear rather than a fixed-length interval, and this specific field is an instantaneous computed rate of accepted ingress traffic rather than a running total, so it reacts immediately to a burst instead of waiting for a bin to close, it is the field to check when you need to see the reverse-direction ingress throughput of the tunnel right now rather than a cumulative volume. For example, this counter might read 7,268 frames/sec during the period since the last manual clear — if that number spikes on the reverse side while the opposite direction stays flat, it flags an asymmetric load or fault specific to that leg of the tunnel.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.12.5.1.24
snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicTxRxBiDirStatsBinRevRxFramesPerSec

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.12.5.1.24.1
snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicTxRxBiDirStatsBinRevRxFramesPerSec.1

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmBasicTxRxBiDirStatsBinRevRxFramesPerSec OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.3cienaCesStatisticsCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.3.1cienaCesPmMibCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2cienaCesPmMIBObjectsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3cienaCesPmStatisticsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12cienaCesPmBasicTxRxBiDirStatsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.5cienaCesPmBasicTxRxBiDirStatisticsBinTableCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.5.1cienaCesPmBasicTxRxBiDirStatisticsBinEntryCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.5.1.24cienaCesPmBasicTxRxBiDirStatsBinRevRxFramesPerSecCIENA-CES-PM