CIENA-CES-PM :: cienaCesPmBasicTxRxBiDirStatsBinRevRxAcceptedFrames

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-PMcienaCesPmBasicTxRxBiDirStatsBinRevRxAcceptedFrames

cienaCesPmBasicTxRxBiDirStatsBinRevRxAcceptedFrames

Module: CIENA-CES-PM

OID (symbolic): CIENA-CES-PM::cienaCesPmBasicTxRxBiDirStatsBinRevRxAcceptedFrames

OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.12.5.1.16

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The number of reverse tunnel accepted frames on this PM instance.

What is cienaCesPmBasicTxRxBiDirStatsBinRevRxAcceptedFrames?

This Counter64 field tallies the frames on the reverse direction of this bidirectional CES tunnel that were accepted on ingress, specifically traffic that passed the tunnel's ingress bandwidth-profile check as in-profile (green) and was let into the tunnel without remarking. Because this Stats row carries no Duration or State field at all, unlike the Curr/History bins — it is a running tally since the last manual clear rather than a fixed-length interval, a rising count here just reflects legitimate billable load flowing through the tunnel in that direction, and tracking it separately per direction (forward vs. reverse) lets you tell whether a problem is one-sided rather than affecting the whole tunnel. For instance, over the period since the last manual clear this counter might climb by roughly 5,152,412 reverse-direction frames — a step-change in that number right after a config change on this tunnel, with the forward-direction counter unaffected, would tell you the change altered how much accepted traffic only that one direction is carrying.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.12.5.1.16
snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicTxRxBiDirStatsBinRevRxAcceptedFrames

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.12.5.1.16.1
snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicTxRxBiDirStatsBinRevRxAcceptedFrames.1

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmBasicTxRxBiDirStatsBinRevRxAcceptedFrames OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.3cienaCesStatisticsCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.3.1cienaCesPmMibCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2cienaCesPmMIBObjectsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3cienaCesPmStatisticsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12cienaCesPmBasicTxRxBiDirStatsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.5cienaCesPmBasicTxRxBiDirStatisticsBinTableCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.5.1cienaCesPmBasicTxRxBiDirStatisticsBinEntryCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.5.1.16cienaCesPmBasicTxRxBiDirStatsBinRevRxAcceptedFramesCIENA-CES-PM