CIENA-CES-PM :: cienaCesPmBasicTxRxBiDirHist24HBinBasicRevTxFramesPerSec

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-PMcienaCesPmBasicTxRxBiDirHist24HBinBasicRevTxFramesPerSec

cienaCesPmBasicTxRxBiDirHist24HBinBasicRevTxFramesPerSec

Module: CIENA-CES-PM

OID (symbolic): CIENA-CES-PM::cienaCesPmBasicTxRxBiDirHist24HBinBasicRevTxFramesPerSec

OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.12.4.1.29

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The number of reverse tunnel frames transmitted per second on this PM instance.

What is cienaCesPmBasicTxRxBiDirHist24HBinBasicRevTxFramesPerSec?

This Counter64 field reports the frames transmitted per second on the reverse direction of this bidirectional CES tunnel, as computed for this PM instance. Because this row is a completed prior day's 24-hour bin kept in the daily-history table, letting you compare one calendar day against another after the fact, and this specific field is an instantaneous computed rate of transmitted egress traffic rather than a running total, so a spike here shows up the moment it happens rather than only after the interval ends, it is the field to check when you need to see the reverse-direction egress throughput of the tunnel right now rather than a cumulative volume. For example, this counter might read 6,380 frames/sec during yesterday's completed 24-hour bin — if that number spikes on the reverse side while the opposite direction stays flat, it flags an asymmetric load or fault specific to that leg of the tunnel.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.12.4.1.29
snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicTxRxBiDirHist24HBinBasicRevTxFramesPerSec

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.12.4.1.29.1
snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicTxRxBiDirHist24HBinBasicRevTxFramesPerSec.1

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmBasicTxRxBiDirHist24HBinBasicRevTxFramesPerSec OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.3cienaCesStatisticsCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.3.1cienaCesPmMibCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2cienaCesPmMIBObjectsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3cienaCesPmStatisticsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12cienaCesPmBasicTxRxBiDirStatsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.4cienaCesPmBasicTxRxBiDirHist24HBinTableCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.4.1cienaCesPmBasicTxRxBiDirHist24HBinEntryCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.4.1.29cienaCesPmBasicTxRxBiDirHist24HBinBasicRevTxFramesPerSecCIENA-CES-PM