CIENA-CES-PM :: cienaCesPmBasicTxRxBiDirCurrBinRevRxBytesPerSec

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-PMcienaCesPmBasicTxRxBiDirCurrBinRevRxBytesPerSec

cienaCesPmBasicTxRxBiDirCurrBinRevRxBytesPerSec

Module: CIENA-CES-PM

OID (symbolic): CIENA-CES-PM::cienaCesPmBasicTxRxBiDirCurrBinRevRxBytesPerSec

OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.12.2.1.25

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The number of reverse tunnel bytes received per second on this PM instance.

What is cienaCesPmBasicTxRxBiDirCurrBinRevRxBytesPerSec?

This Counter64 field reports the bytes received per second on the reverse direction of this bidirectional CES tunnel, as computed for this PM instance. Because this is the currently open, still-accumulating measurement interval that keeps climbing until its boundary is reached and it rolls off into the history table, and this specific field is an instantaneous computed rate of accepted ingress traffic rather than a running total, so it reacts immediately to a burst instead of waiting for a bin to close, it is the field to check when you need to see the reverse-direction ingress throughput of the tunnel right now rather than a cumulative volume. For example, this counter might read 4,160 bytes/sec during the in-progress 15-minute bin — a sudden jump to several times that on the reverse side, with no matching rise on the other direction, would point to a one-way traffic surge or an attack riding that leg of the tunnel.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.12.2.1.25
snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicTxRxBiDirCurrBinRevRxBytesPerSec

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.12.2.1.25.1
snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicTxRxBiDirCurrBinRevRxBytesPerSec.1

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmBasicTxRxBiDirCurrBinRevRxBytesPerSec OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.3cienaCesStatisticsCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.3.1cienaCesPmMibCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2cienaCesPmMIBObjectsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3cienaCesPmStatisticsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12cienaCesPmBasicTxRxBiDirStatsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.2cienaCesPmBasicTxRxBiDirCurrBinTableCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.2.1cienaCesPmBasicTxRxBiDirCurrBinEntryCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.2.1.25cienaCesPmBasicTxRxBiDirCurrBinRevRxBytesPerSecCIENA-CES-PM