CIENA-CES-PM :: cienaCesPmBasicTxRxBiDirCurrBinFwdTxFramesPerSec

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-PMcienaCesPmBasicTxRxBiDirCurrBinFwdTxFramesPerSec

cienaCesPmBasicTxRxBiDirCurrBinFwdTxFramesPerSec

Module: CIENA-CES-PM

OID (symbolic): CIENA-CES-PM::cienaCesPmBasicTxRxBiDirCurrBinFwdTxFramesPerSec

OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.12.2.1.16

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The number of forward tunnel frames transmitted per second on this PM instance.

What is cienaCesPmBasicTxRxBiDirCurrBinFwdTxFramesPerSec?

This Counter64 field reports the frames transmitted per second on the forward direction of this bidirectional CES tunnel, as computed for this PM instance. Because this is the currently open, still-accumulating measurement interval that keeps climbing until its boundary is reached and it rolls off into the history table, and this specific field is an instantaneous computed rate of transmitted egress traffic rather than a running total, so a spike here shows up the moment it happens rather than only after the interval ends, it is the field to check when you need to see the forward-direction egress throughput of the tunnel right now rather than a cumulative volume. For example, this counter might read 3,827 frames/sec during the in-progress 15-minute bin — if that number spikes on the forward side while the opposite direction stays flat, it flags an asymmetric load or fault specific to that leg of the tunnel.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.12.2.1.16
snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicTxRxBiDirCurrBinFwdTxFramesPerSec

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.12.2.1.16.1
snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicTxRxBiDirCurrBinFwdTxFramesPerSec.1

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmBasicTxRxBiDirCurrBinFwdTxFramesPerSec OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.3cienaCesStatisticsCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.3.1cienaCesPmMibCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2cienaCesPmMIBObjectsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3cienaCesPmStatisticsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12cienaCesPmBasicTxRxBiDirStatsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.2cienaCesPmBasicTxRxBiDirCurrBinTableCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.2.1cienaCesPmBasicTxRxBiDirCurrBinEntryCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.2.1.16cienaCesPmBasicTxRxBiDirCurrBinFwdTxFramesPerSecCIENA-CES-PM