CIENA-CES-PM :: cienaCesPmBasicTxRxBiDirCurr24HBinRevRxFramesPerSec

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-PMcienaCesPmBasicTxRxBiDirCurr24HBinRevRxFramesPerSec

cienaCesPmBasicTxRxBiDirCurr24HBinRevRxFramesPerSec

Module: CIENA-CES-PM

OID (symbolic): CIENA-CES-PM::cienaCesPmBasicTxRxBiDirCurr24HBinRevRxFramesPerSec

OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.12.3.1.26

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The number of reverse tunnel frames received per second on this PM instance.

What is cienaCesPmBasicTxRxBiDirCurr24HBinRevRxFramesPerSec?

This Counter64 field reports the frames received per second on the reverse direction of this bidirectional CES tunnel, as computed for this PM instance. Because this is today's still-open 24-hour PM window, which keeps growing through the day and resets only when the daily boundary rolls over, and this specific field is an instantaneous computed rate of accepted ingress traffic rather than a running total, so it reacts immediately to a burst instead of waiting for a bin to close, it is the field to check when you need to see the reverse-direction ingress throughput of the tunnel right now rather than a cumulative volume. For example, this counter might read 5,233 frames/sec during today's still-running 24-hour bin — if that number spikes on the reverse side while the opposite direction stays flat, it flags an asymmetric load or fault specific to that leg of the tunnel.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.12.3.1.26
snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicTxRxBiDirCurr24HBinRevRxFramesPerSec

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.12.3.1.26.1
snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicTxRxBiDirCurr24HBinRevRxFramesPerSec.1

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmBasicTxRxBiDirCurr24HBinRevRxFramesPerSec OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.3cienaCesStatisticsCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.3.1cienaCesPmMibCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2cienaCesPmMIBObjectsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3cienaCesPmStatisticsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12cienaCesPmBasicTxRxBiDirStatsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.3cienaCesPmBasicTxRxBiDirCurr24HBinTableCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.3.1cienaCesPmBasicTxRxBiDirCurr24HBinEntryCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.12.3.1.26cienaCesPmBasicTxRxBiDirCurr24HBinRevRxFramesPerSecCIENA-CES-PM