All MIBs › CIENA-CES-PM › cienaCesPmBasicTxRxBiDirCurr24HBinFwdRxAcceptedBytes
cienaCesPmBasicTxRxBiDirCurr24HBinFwdRxAcceptedBytes
Module: CIENA-CES-PM
OID (symbolic): CIENA-CES-PM::cienaCesPmBasicTxRxBiDirCurr24HBinFwdRxAcceptedBytes
OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.12.3.1.5
Node type: OBJECT-TYPE
Type: Counter64
Access: read-only
Description: The number of forward tunnel accepted bytes on this PM instance.
What is cienaCesPmBasicTxRxBiDirCurr24HBinFwdRxAcceptedBytes?
This Counter64 field tallies the bytes on the forward direction of this bidirectional CES tunnel that were accepted on ingress, specifically traffic that passed the tunnel's ingress bandwidth-profile check as in-profile (green) and was let into the tunnel without remarking. Because this is today's still-open 24-hour PM window, which keeps growing through the day and resets only when the daily boundary rolls over, a rising count here just reflects legitimate billable load flowing through the tunnel in that direction, and tracking it separately per direction (forward vs. reverse) lets you tell whether a problem is one-sided rather than affecting the whole tunnel. For instance, over today's still-running 24-hour bin this counter might climb by roughly 5.1 MB of forward-direction traffic — if the matching counter for the reverse direction stays far lower (or far higher) than this one, that directional imbalance is itself the diagnostic clue, since a healthy bidirectional tunnel would normally carry fairly similar accepted volume both ways.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.12.3.1.5 snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicTxRxBiDirCurr24HBinFwdRxAcceptedBytes
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.12.3.1.5.1 snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicTxRxBiDirCurr24HBinFwdRxAcceptedBytes.1
Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmBasicTxRxBiDirCurr24HBinFwdRxAcceptedBytes OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1271 | ciena | CIENA-SMI |
| 1.3.6.1.4.1.1271.2 | cienaCes | CIENA-SMI |
| 1.3.6.1.4.1.1271.2.3 | cienaCesStatistics | CIENA-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1271.2.3.1 | cienaCesPmMib | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2 | cienaCesPmMIBObjects | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3 | cienaCesPmStatistics | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.12 | cienaCesPmBasicTxRxBiDirStats | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.12.3 | cienaCesPmBasicTxRxBiDirCurr24HBinTable | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.12.3.1 | cienaCesPmBasicTxRxBiDirCurr24HBinEntry | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.2.3.12.3.1.5 | cienaCesPmBasicTxRxBiDirCurr24HBinFwdRxAcceptedBytes | CIENA-CES-PM |