CIENA-CES-PM :: cienaCesPmBasicRxHistoryBinEndTime

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-PMcienaCesPmBasicRxHistoryBinEndTime

cienaCesPmBasicRxHistoryBinEndTime

Module: CIENA-CES-PM

OID (symbolic): CIENA-CES-PM::cienaCesPmBasicRxHistoryBinEndTime

OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.3

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-only

Description: Collection end time of the bin.

What is cienaCesPmBasicRxHistoryBinEndTime?

This is a text timestamp recording the actual moment one specific, already-completed 15-minute collection interval, retained in a rolling history buffer so a series of past intervals can be graphed stopped collecting its ingress traffic on this service classified as accepted (in-profile), yellow (remarked, over the committed rate but under the excess rate), or dropped (over the excess rate), plus live receive-rate gauges, since this bin has already closed. Paired with the bin's start time it lets you compute the exact wall-clock span the neighboring ingress rate-policing counters actually cover, which matters here because a History bin cut short mid-way (say, by a card reset) would otherwise look identical to one that ran its full 15-minute length. For instance, a History bin whose end time is only a few minutes after its start time, instead of the full 15-minute apart, tells you the ingress rate-policing totals reported with it cover a truncated window and will read lower than a normal bin purely because of that, not because traffic was actually light.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.3
snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicRxHistoryBinEndTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.3.1
snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicRxHistoryBinEndTime.1

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmBasicRxHistoryBinEndTime OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.3cienaCesStatisticsCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.3.1cienaCesPmMibCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2cienaCesPmMIBObjectsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3cienaCesPmStatisticsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.6cienaCesPmBasicRxStatsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.6.1cienaCesPmBasicRxHistoryBinTableCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1cienaCesPmBasicRxHistoryBinEntryCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.3cienaCesPmBasicRxHistoryBinEndTimeCIENA-CES-PM