CIENA-CES-PM :: cienaCesPmBasicOtuCurr24HBinQMinOtu

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-PMcienaCesPmBasicOtuCurr24HBinQMinOtu

cienaCesPmBasicOtuCurr24HBinQMinOtu

Module: CIENA-CES-PM

OID (symbolic): CIENA-CES-PM::cienaCesPmBasicOtuCurr24HBinQMinOtu

OID (numeric): 1.3.6.1.4.1.1271.2.3.1.2.3.14.3.1.16

Node type: OBJECT-TYPE

Type: PmInteger32Milli

Access: read-only

Description: Quality Factor Minimum, Optical Transport Unit.

What is cienaCesPmBasicOtuCurr24HBinQMinOtu?

This reports the lowest Q-factor recorded for this OTU signal during the bin, a logarithmic signal-quality/margin figure stored in the milli-scaled PmInteger32Milli format. Because this reading comes from the live 24-hour bin accumulating since the last daily roll-over for this OTU signal, Q-factor condenses optical SNR and receiver margin into one number, and this minimum tells an engineer how close this specific signal came to its worst-case margin during the interval, not just its typical condition. For example, a Q-factor that averages 9.5 dB on this OTU signal but dips to a minimum of 7.0 dB in the same bin shows the link occasionally operates much closer to its FEC-failure threshold, often around 5.5-6 dB, than the average suggests, so far within today's still-open 24-hour interval.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.14.3.1.16
snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicOtuCurr24HBinQMinOtu

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.2.3.14.3.1.16.1
snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmBasicOtuCurr24HBinQMinOtu.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cienaCesPmBasicOtuCurr24HBinQMinOtu.1

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmBasicOtuCurr24HBinQMinOtu OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.3cienaCesStatisticsCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.3.1cienaCesPmMibCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2cienaCesPmMIBObjectsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3cienaCesPmStatisticsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.14cienaCesPmBasicOtuStatsCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.14.3cienaCesPmBasicOtuCurr24HBinTableCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.14.3.1cienaCesPmBasicOtuCurr24HBinEntryCIENA-CES-PM
1.3.6.1.4.1.1271.2.3.1.2.3.14.3.1.16cienaCesPmBasicOtuCurr24HBinQMinOtuCIENA-CES-PM