All MIBs › CIENA-CES-PM › cienaCesPmAdjustmentTcaLastIntvlEndTcaWatermarkStats
cienaCesPmAdjustmentTcaLastIntvlEndTcaWatermarkStats
Module: CIENA-CES-PM
OID (symbolic): CIENA-CES-PM::cienaCesPmAdjustmentTcaLastIntvlEndTcaWatermarkStats
OID (numeric): 1.3.6.1.4.1.1271.2.3.1.3.3.1.1.49
Node type: OBJECT-TYPE
Type: PmStatBitmap
Access: read-only
Description: The statistic(s) which were used by the Adjustment TCA feature to establish the watermark value identified by the cienaCesPmAdjustmentTcaLastIntvlEndTcaWatermarkValue object. Since this object applies to the last Adjustment TCA which occurred on behalf of the PM instance due to end of Adjustment Interval high watermark value being outside of the upper and lower boundary region, this object represents the value of cienaCesPmAdjustmentTcaHighWatermarkStats at the time of such Adjustment TCA.
What is cienaCesPmAdjustmentTcaLastIntvlEndTcaWatermarkStats?
This bitmap identifies exactly which statistic(s) fed the watermark that triggered the last interval-end recalibration. Because it's a bitmap, an admin can see precisely which of the several statistics tracked for the PM instance (say, peak utilization versus an error count) actually drove the threshold change, rather than guessing from the aggregate. For example, a returned value with only bit 0x02 set might indicate the 'max' statistic alone fed the watermark, meaning the recalibration was driven purely by the interval's peak reading.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.3.3.1.1.49 snmpwalk -v2c -c public <target> CIENA-CES-PM::cienaCesPmAdjustmentTcaLastIntvlEndTcaWatermarkStats
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.1.3.3.1.1.49.1 snmpget -v2c -c public <target> CIENA-CES-PM::cienaCesPmAdjustmentTcaLastIntvlEndTcaWatermarkStats.1
Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-PM::cienaCesPmAdjustmentTcaLastIntvlEndTcaWatermarkStats OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1271 | ciena | CIENA-SMI |
| 1.3.6.1.4.1.1271.2 | cienaCes | CIENA-SMI |
| 1.3.6.1.4.1.1271.2.3 | cienaCesStatistics | CIENA-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1271.2.3.1 | cienaCesPmMib | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.3 | cienaCesPmThreshold | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.3.3 | cienaCesPmInstanceAdjustmentTca | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.3.3.1 | cienaCesPmInstanceAdjustmentTcaTable | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.3.3.1.1 | cienaCesPmInstanceAdjustmentTcaEntry | CIENA-CES-PM |
| 1.3.6.1.4.1.1271.2.3.1.3.3.1.1.49 | cienaCesPmAdjustmentTcaLastIntvlEndTcaWatermarkStats | CIENA-CES-PM |