CHIPCOMMIB :: expDot5RingStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCHIPCOMMIBexpDot5RingStatus

expDot5RingStatus

Module: CHIPCOMMIB

OID (symbolic): CHIPCOMMIB::expDot5RingStatus

OID (numeric): 1.3.6.1.4.1.49.2.4.1.1.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The current interface status which can be used

to diagnose fluctuating problems that can occur

on token rings, after a station has successfully

been added to the ring.

Before an open is completed, this object has

the value for the 'no status' condition. The

expDot5RingState and expDot5RingOpenStatus objects

provide for debugging problems when the station

can not even enter the ring.

The object's value is a sum of values, one

for each currently applicable condition. The

following values are defined for various

conditions:

0 = No Problems detected

32 = Ring Recovery

64 = Single Station

256 = Remove Received

512 = reserved

1024 = Auto-Removal Error

2048 = Lobe Wire Fault

4096 = Transmit Beacon

8192 = Soft Error

16384 = Hard Error

32768 = Signal Loss

131072 = no status, open not completed.

What is expDot5RingStatus?

Reports the current diagnostic status of a Token Ring interface after it has joined the ring, used to help pinpoint intermittent ring problems.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.49.2.4.1.1.1.1.3
snmpwalk -v2c -c public <target> CHIPCOMMIB::expDot5RingStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.49.2.4.1.1.1.1.3.1
snmpget -v2c -c public <target> CHIPCOMMIB::expDot5RingStatus.1

Start monitoring Chipcom (3Com) Ethernet/Token Ring switching hub or LAN concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CHIPCOMMIB::expDot5RingStatus OID value, configure state conditions and alerts, and monitor any Chipcom (3Com) Ethernet/Token Ring switching hub or LAN concentrator (legacy) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.49chipcomCHIPAGENT-MIB
1.3.6.1.4.1.49.2chipmib02CHIPAGENT-MIB
1.3.6.1.4.1.49.2.4chipExperimentCHIPAGENT-MIB
1.3.6.1.4.1.49.2.4.1chipExpTokenRingCHIPAGENT-MIB
1.3.6.1.4.1.49.2.4.1.1dot5CHIPAGENT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.49.2.4.1.1.1expDot5TableCHIPCOMMIB
1.3.6.1.4.1.49.2.4.1.1.1.1expDot5EntryCHIPCOMMIB
1.3.6.1.4.1.49.2.4.1.1.1.1.3expDot5RingStatusCHIPCOMMIB