CASCADE-MIB :: pportDiagFailCount

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCASCADE-MIBpportDiagFailCount

pportDiagFailCount

Module: CASCADE-MIB

OID (symbolic): CASCADE-MIB::pportDiagFailCount

OID (numeric): 1.3.6.1.4.1.277.1.4.2.1.27

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Number of failed diagnostic passes.

What is pportDiagFailCount?

This counts how many of this port's diagnostic test passes failed. Any nonzero value here after a completed test run is direct evidence of a problem on this specific port's signal path under the loopback point that was tested, and pportDiagResultStr should be checked next for detail. A run of 10 passes with pportDiagFailCount of 3 would indicate an intermittent fault on this port affecting roughly 30 percent of test attempts, worth escalating to hardware replacement.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.277.1.4.2.1.27
snmpwalk -v2c -c public <target> CASCADE-MIB::pportDiagFailCount

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.277.1.4.2.1.27.1
snmpget -v2c -c public <target> CASCADE-MIB::pportDiagFailCount.1

Start monitoring Cascade Communications ATM/Frame Relay switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CASCADE-MIB::pportDiagFailCount OID value, configure state conditions and alerts, and monitor any Cascade Communications ATM/Frame Relay switches (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.277cascadeCASCADE-MIB
1.3.6.1.4.1.277.1cascfrCASCADE-MIB
1.3.6.1.4.1.277.1.4pportCASCADE-MIB
1.3.6.1.4.1.277.1.4.2pportTableCASCADE-MIB
1.3.6.1.4.1.277.1.4.2.1pportEntryCASCADE-MIB
1.3.6.1.4.1.277.1.4.2.1.27pportDiagFailCountCASCADE-MIB