All MIBs › CASCADE-MIB › lportQ922Enable
lportQ922Enable
Module: CASCADE-MIB
OID (symbolic): CASCADE-MIB::lportQ922Enable
OID (numeric): 1.3.6.1.4.1.277.1.5.1.1.165
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Set 1 to eanble Q.922 on this port. Q.922 must be enabled if the port is used for SVC.
What is lportQ922Enable?
This read-write field turns Q.922, the LAPD-based signaling protocol used for Frame Relay SVC call control, on or off for this port, and the description explicitly notes it must be enabled if this port is going to be used for Switched Virtual Circuits rather than only PVCs. An admin enabling SVC support on a port must remember to set this first, since attempting SVC signaling without Q.922 enabled would leave the port unable to process the call-setup messages SVCs require. For example, a port being repurposed from PVC-only service to also support on-demand SVCs needs lportQ922Enable set to enable(1) before any SVC call attempts will succeed on it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.277.1.5.1.1.165 snmpwalk -v2c -c public <target> CASCADE-MIB::lportQ922Enable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.277.1.5.1.1.165.1 snmpget -v2c -c public <target> CASCADE-MIB::lportQ922Enable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.277.1.5.1.1.165.1 i <value>
Start monitoring Cascade Communications ATM/Frame Relay switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CASCADE-MIB::lportQ922Enable OID value, configure state conditions and alerts, and monitor any Cascade Communications ATM/Frame Relay switches (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.277 | cascade | CASCADE-MIB |
| 1.3.6.1.4.1.277.1 | cascfr | CASCADE-MIB |
| 1.3.6.1.4.1.277.1.5 | lport | CASCADE-MIB |
| 1.3.6.1.4.1.277.1.5.1 | lportTable | CASCADE-MIB |
| 1.3.6.1.4.1.277.1.5.1.1 | lportEntry | CASCADE-MIB |
| 1.3.6.1.4.1.277.1.5.1.1.165 | lportQ922Enable | CASCADE-MIB |