CASCADE-MIB :: dsx1PortId

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCASCADE-MIBdsx1PortId

dsx1PortId

Module: CASCADE-MIB

OID (symbolic): CASCADE-MIB::dsx1PortId

OID (numeric): 1.3.6.1.4.1.277.1.8.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The port number of the corresponding DS1 on the board.

What is dsx1PortId?

This read-only value reports the port number of the corresponding DS1 interface on the board identified by dsx1SlotId, narrowing the physical identification from the card down to the specific port on that card. Combined with the slot ID, this fully specifies the physical location of a given DS1 circuit within the chassis. An engineer troubleshooting a specific DS1 line would use dsx1SlotId and dsx1PortId together to physically trace and test the correct cable and port on the card.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.277.1.8.1.1.2
snmpwalk -v2c -c public <target> CASCADE-MIB::dsx1PortId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.277.1.8.1.1.2.1
snmpget -v2c -c public <target> CASCADE-MIB::dsx1PortId.1

Start monitoring Cascade Communications ATM/Frame Relay switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CASCADE-MIB::dsx1PortId OID value, configure state conditions and alerts, and monitor any Cascade Communications ATM/Frame Relay switches (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.277cascadeCASCADE-MIB
1.3.6.1.4.1.277.1cascfrCASCADE-MIB
1.3.6.1.4.1.277.1.8ds1CASCADE-MIB
1.3.6.1.4.1.277.1.8.1dsx1ConfigTableCASCADE-MIB
1.3.6.1.4.1.277.1.8.1.1dsx1ConfigEntryCASCADE-MIB
1.3.6.1.4.1.277.1.8.1.1.2dsx1PortIdCASCADE-MIB