CAMBIUM-PTP650-MIB :: nIDULanPortAutoNegotiation

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCAMBIUM-PTP650-MIBnIDULanPortAutoNegotiation

nIDULanPortAutoNegotiation

Module: CAMBIUM-PTP650-MIB

OID (symbolic): CAMBIUM-PTP650-MIB::nIDULanPortAutoNegotiation

OID (numeric): 1.3.6.1.4.1.17713.7.6.70

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This controls whether the local Ethernet interface configuration is automatically negotiated or forced. Do not use a forced setting together with auto negotiation at the Ethernet link partner. If you want to run your Ethernet link at a fixed speed and duplex then you would normally leave auto negotiation enabled and only enable the single Auto Neg Advertisement option that you want the link to run in - FORCING ETHERNET CONFIGURATION IS A LAST RESORT WHICH SHOULD ONLY BE PERFORMED IF YOU ARE HAVING PROBLEMS WITH AUTO NEGOTIATION - AND YOU MUST ENSURE THAT YOU CONFIGURE BOTH THIS UNIT AND THE ETHERNET LINK PARTNER TO WHICH IT IS CONNECTED IDENTICALLY (THE LINK PARTNER MUST NOT HAVE AUTO NEGOTIATION ENABLED EITHER, OTHERWISE A DUPLEX MISMATCH WILL OCCUR). NB: The new setting will only take effect after a system reboot.

What is nIDULanPortAutoNegotiation?

This read-only setting reports whether the NIDU LAN Ethernet interface negotiates its speed and duplex automatically or uses a forced configuration, mirroring mainPSUPortAutoNegotiation for the NIDU LAN port. Any change only takes effect after a reboot.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.17713.7.6.70
snmpwalk -v2c -c public <target> CAMBIUM-PTP650-MIB::nIDULanPortAutoNegotiation

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.17713.7.6.70.1
snmpget -v2c -c public <target> CAMBIUM-PTP650-MIB::nIDULanPortAutoNegotiation.1

Start monitoring Cambium Networks wireless bridges with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAMBIUM-PTP650-MIB::nIDULanPortAutoNegotiation OID value, configure state conditions and alerts, and monitor any Cambium Networks wireless bridges from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.17713cambiumCAMBIUM-PMP80211-MIB
Numeric OIDNameModule
1.3.6.1.4.1.17713.7ptp650CAMBIUM-PTP650-MIB
1.3.6.1.4.1.17713.7.6ethernetCAMBIUM-PTP650-MIB
1.3.6.1.4.1.17713.7.6.70nIDULanPortAutoNegotiationCAMBIUM-PTP650-MIB