All MIBs › CAMBIUM-PTP650-MIB › mainPSUPortAutoNegotiation
mainPSUPortAutoNegotiation
Module: CAMBIUM-PTP650-MIB
OID (symbolic): CAMBIUM-PTP650-MIB::mainPSUPortAutoNegotiation
OID (numeric): 1.3.6.1.4.1.17713.7.6.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This controls whether the local Ethernet interface configuration is automatically negotiated or forced. Do not use a forced setting together with auto negotiation at the Ethernet link partner. If you want to run your Ethernet link at a fixed speed and duplex then you would normally leave auto negotiation enabled and only enable the single Auto Neg Advertisement option that you want the link to run in - FORCING ETHERNET CONFIGURATION IS A LAST RESORT WHICH SHOULD ONLY BE PERFORMED IF YOU ARE HAVING PROBLEMS WITH AUTO NEGOTIATION - AND YOU MUST ENSURE THAT YOU CONFIGURE BOTH THIS UNIT AND THE ETHERNET LINK PARTNER TO WHICH IT IS CONNECTED IDENTICALLY (THE LINK PARTNER MUST NOT HAVE AUTO NEGOTIATION ENABLED EITHER, OTHERWISE A DUPLEX MISMATCH WILL OCCUR). NB: The new setting will only take effect after a system reboot.
What is mainPSUPortAutoNegotiation?
This read-only setting reports whether the Main PSU Ethernet port negotiates its speed and duplex automatically or uses a forced configuration. The source description warns that forcing this setting is a last resort, since both ends of the Ethernet link must be configured identically or a duplex mismatch will occur, and any change only takes effect after a reboot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.17713.7.6.1 snmpwalk -v2c -c public <target> CAMBIUM-PTP650-MIB::mainPSUPortAutoNegotiation
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.17713.7.6.1.1 snmpget -v2c -c public <target> CAMBIUM-PTP650-MIB::mainPSUPortAutoNegotiation.1
Start monitoring Cambium Networks wireless bridges with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAMBIUM-PTP650-MIB::mainPSUPortAutoNegotiation OID value, configure state conditions and alerts, and monitor any Cambium Networks wireless bridges from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.17713 | cambium | CAMBIUM-PMP80211-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.17713.7 | ptp650 | CAMBIUM-PTP650-MIB |
| 1.3.6.1.4.1.17713.7.6 | ethernet | CAMBIUM-PTP650-MIB |
| 1.3.6.1.4.1.17713.7.6.1 | mainPSUPortAutoNegotiation | CAMBIUM-PTP650-MIB |