All MIBs › CABH-SEC-MIB › cabhSec2FwPolicySelection
cabhSec2FwPolicySelection
Module: CABH-SEC-MIB
OID (symbolic): CABH-SEC-MIB::cabhSec2FwPolicySelection
OID (numeric): 1.3.6.1.4.1.4491.2.4.2.5.4.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object allows for selection of the filtering policy as defined by the following options:
factoryDefault (1) The firewall filters against the Factory Default Ruleset in the cabhSec2FwFactoryDefaultFilterTable.
configuredRulesetBoth (2) The firewall filters against the Configured Ruleset defined by both the docsDevFilterIpTable and the cabhSec2FwLocalFilterIpTable.
factoryDefaultAndConfiguredRulesetBoth (3) The firewall filters against the CableHome specified Factory Default Ruleset in the cabhSec2FwFactoryDefaultFilterTable and the Configured Ruleset in the docsDevFilterIpTable and the cabhSec2FwLocalFilterIpTable.
configuredRulesetDocsDevFilterIpTable(4) The firewall filters against the Configured Ruleset defined by the docsDevFilterIpTable.
configuredRulesetCabhSec2FwLocalFilterIpTable (5) The firewall filters against the Configured Ruleset defined by the cabhSec2FwLocalFilterIpTable.
factoryDefaultAndDocsDevFilterIpTable (6) The firewall filters against the Factory Default Ruleset and the Configured Ruleset defined by the DocsDevFilterIpTable.
factoryDefaultAndCabhSec2FwLocalFilterIpTable (7) The firewall filters against the Factory Default Ruleset and the Configured Ruleset defined by the cabhSec2FwLocalFilterIpTable.
What is cabhSec2FwPolicySelection?
Selects which filtering policy the firewall applies, such as the factory default rule set, the operator-configured rule set, or a combination. This controls the source of filtering rules used for traffic decisions.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.4.2.5.4.1.7 snmpwalk -v2c -c public <target> CABH-SEC-MIB::cabhSec2FwPolicySelection
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.4.2.5.4.1.7.1 snmpget -v2c -c public <target> CABH-SEC-MIB::cabhSec2FwPolicySelection.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.4.2.5.4.1.7.1 i <value>
Start monitoring CableHome-compliant residential gateways (cable modem/router) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CABH-SEC-MIB::cabhSec2FwPolicySelection OID value, configure state conditions and alerts, and monitor any CableHome-compliant residential gateways (cable modem/router) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.4 | clabProjCableHome | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.4.2 | cabhSecMib | CABH-SEC-MIB |
| 1.3.6.1.4.1.4491.2.4.2.5 | cabhSecMibObjects | CABH-SEC-MIB |
| 1.3.6.1.4.1.4491.2.4.2.5.4 | cabhSec2FwObjects | CABH-SEC-MIB |
| 1.3.6.1.4.1.4491.2.4.2.5.4.1 | cabhSec2FwBase | CABH-SEC-MIB |
| 1.3.6.1.4.1.4491.2.4.2.5.4.1.7 | cabhSec2FwPolicySelection | CABH-SEC-MIB |