All MIBs › C-PRODUCT-CBR-MIB › cbrDS1E1PortConfPortMode
cbrDS1E1PortConfPortMode
Module: C-PRODUCT-CBR-MIB
OID (symbolic): C-PRODUCT-CBR-MIB::cbrDS1E1PortConfPortMode
OID (numeric): 1.3.6.1.4.1.43.1.12.3.1.1.15.2.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object indicates the type of service configured to the specified T1/E1 port interface. Unstructured allows the application to utilize the entire available bandwidth at a bit rate of 1.544 Mb/s for T1 or 2.048 Mb/s for E1. T1/E1 Framing is optional in this service mode. Structured service provides Nx64 kbit/s capability where N ranges between 1 and the maximum number of available DS0 channels. Struct-Voice passes traffic with signaling informaion enabled. Struct-Data passes traffic with signaling information disabled. Changing the mode configuration will cause the following parameters to be changed.
. framing timing signaling crc-4 . ------- ------ --------- ----- . T1 unstructured unframed N/A N/A N/A . struct data ESF loop* N/A N/A . struct voice ESF loop* N/A N/A . E1 unstructured unframed N/A disable disable . struct data single loop* disable disable . struct voice multi loop* enable enable
* timing is converted to loop timing only if timing is previously . configured to be in SRTS or adaptive timing modes
NOTE: Changing this object to a different mode will cause all previously associated VCC's to be deleted. The default value for this object is unstructured (1).
What is cbrDS1E1PortConfPortMode?
Read-write setting that configures whether a T1/E1 port operates in unstructured mode (full bandwidth, framing optional) or a structured service mode that carves the line into individual channels.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.1.12.3.1.1.15.2.1.1.3 snmpwalk -v2c -c public <target> C-PRODUCT-CBR-MIB::cbrDS1E1PortConfPortMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.1.12.3.1.1.15.2.1.1.3.1 snmpget -v2c -c public <target> C-PRODUCT-CBR-MIB::cbrDS1E1PortConfPortMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.1.12.3.1.1.15.2.1.1.3.1 i <value>
Start monitoring Networking equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the C-PRODUCT-CBR-MIB::cbrDS1E1PortConfPortMode OID value, configure state conditions and alerts, and monitor any Networking equipment from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.1 | products | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.12 | atm | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.12.3 | atmAccess | A3Com-products-MIB |
| 1.3.6.1.4.1.43.1.12.3.1 | config | C-PRODUCT-GROUP-MIB |
| 1.3.6.1.4.1.43.1.12.3.1.1 | c_product | C-PRODUCT-GROUP-MIB |
| 1.3.6.1.4.1.43.1.12.3.1.1.15 | cbr | C-PRODUCT-GROUP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.1.12.3.1.1.15.2 | cbrDS1E1PortConfig | C-PRODUCT-CBR-MIB |
| 1.3.6.1.4.1.43.1.12.3.1.1.15.2.1 | cbrDS1E1PortConfTable | C-PRODUCT-CBR-MIB |
| 1.3.6.1.4.1.43.1.12.3.1.1.15.2.1.1 | cbrDS1E1PortConfEntry | C-PRODUCT-CBR-MIB |
| 1.3.6.1.4.1.43.1.12.3.1.1.15.2.1.1.3 | cbrDS1E1PortConfPortMode | C-PRODUCT-CBR-MIB |