Baytech-MIB-403-1 :: sBTAEnvironmentalAllHumiditySensorsLoThresholdTrapEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBaytech-MIB-403-1sBTAEnvironmentalAllHumiditySensorsLoThresholdTrapEnable

sBTAEnvironmentalAllHumiditySensorsLoThresholdTrapEnable

Module: Baytech-MIB-403-1

OID (symbolic): Baytech-MIB-403-1::sBTAEnvironmentalAllHumiditySensorsLoThresholdTrapEnable

OID (numeric): 1.3.6.1.4.1.4779.1.6.11

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Lo Threshold trap enable for all humidity sensors.

What is sBTAEnvironmentalAllHumiditySensorsLoThresholdTrapEnable?

A read-write setting that enables or disables sending an SNMP trap when any humidity sensor's reading falls below its configured low threshold.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4779.1.6.11
snmpwalk -v2c -c public <target> Baytech-MIB-403-1::sBTAEnvironmentalAllHumiditySensorsLoThresholdTrapEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4779.1.6.11.1
snmpget -v2c -c public <target> Baytech-MIB-403-1::sBTAEnvironmentalAllHumiditySensorsLoThresholdTrapEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4779.1.6.11.1 i <value>

Start monitoring Baytech 403-series power controller/PDU (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Baytech-MIB-403-1::sBTAEnvironmentalAllHumiditySensorsLoThresholdTrapEnable OID value, configure state conditions and alerts, and monitor any Baytech 403-series power controller/PDU (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4779baytechBaytech-MIB-401-4
1.3.6.1.4.1.4779.1btadevicesBaytech-MIB-401-4
1.3.6.1.4.1.4779.1.6sBTAEnvironmentalBaytech-MIB-401-4
Numeric OIDNameModule
1.3.6.1.4.1.4779.1.6.11sBTAEnvironmentalAllHumiditySensorsLoThresholdTrapEnableBaytech-MIB-403-1