BTI7800-NOTIFICATIONS-MIB

All MIBs › BTI7800-NOTIFICATIONS-MIB

Organization: BTI Systems Inc.

Last Updated: 2014-05-05

Category: Alarm and Event Management, Optical and WDM, Vendor: BTI Systems

Description: Defines SNMP trap notifications for fault and state-change events on BTI Systems BTI7800 optical nodes.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BTI7800-NOTIFICATIONS-MIB?

BTI7800-NOTIFICATIONS-MIB defines the SNMP trap/notification framework for reporting active alarms and conditions on BTI Systems' BTI7800 optical transport nodes. It exposes fault-oriented data attached to each notification: which entity raised it, an alarm code, the type of report, a timestamp, a severity level, and whether the condition is service-affecting, along with a free-text description. Its monitoring value is squarely about fault/status detection on hardware and traffic-carrying services: the serviceAffecting flag combined with severity lets an operator immediately distinguish a critical, traffic-impacting hardware or optical-path failure from an informational or minor condition, functioning as the platform's real-time alarm feed. It depends on the base BTI7800-MIB for the entity/object model referenced by entityName and on standard SNMPv2 notification conventions for delivery. It is deployed in service-provider optical transport networks where NOC systems subscribe to these traps to drive alarm correlation and outage response for BTI7800 nodes. Engineers can download the BTI7800-NOTIFICATIONS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BTI7800-NOTIFICATIONS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

BTI Systems BTI7800 optical transport network node

Monitoring Examples

A management station receiving a trap from this MIB would inspect entityName to identify the affected shelf/card/port, code and description to determine the specific alarm condition, and severity plus serviceAffecting to prioritize response, a critical severity with serviceAffecting set to true on an optical entity would demand immediate escalation. timeStamp lets the NOC correlate the alarm against other events, while reportType distinguishes a new alarm raise from a clear/update. Because this MIB is entirely notification-oriented, its monitoring is inherently event-driven rather than polled.

What Can Be Monitored

active alarm/condition reports
alarm severity level
service-affecting status flag
alarm timestamp
affected entity/component name

Imported Objects

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DateAndTime
DisplayString
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
bTI7800_NOTIFICATIONS_MIB	1.3.6.1.4.1.18070.2.9.2			The bti7800-conditions submodule defines the data modeling that supports the retrieval of active alarms and conditions on the BTI7800 system.
notificationObjects	1.3.6.1.4.1.18070.2.9.2.1
variables	1.3.6.1.4.1.18070.2.9.2.1.1
STR entityName	1.3.6.1.4.1.18070.2.9.2.1.1.1	String	read-write	The entityName identifies the system-unique name of the entity against which the condition is raised.
CON code	1.3.6.1.4.1.18070.2.9.2.1.1.2	ConditionCode	read-write	Identifies the type of condition raised.
INT reportType	1.3.6.1.4.1.18070.2.9.2.1.1.3	INTEGER	read-write	If set to non-alarmed, the list entry is a non-alarmed condition. If set to alarmed, the entry is an alarmed condition.
DAT timeStamp	1.3.6.1.4.1.18070.2.9.2.1.1.4	DateAndTime	read-write	The date and time at which the condition became active.
SEV severity	1.3.6.1.4.1.18070.2.9.2.1.1.5	Severity	read-write	The severity level of the condition.
T/F serviceAffecting	1.3.6.1.4.1.18070.2.9.2.1.1.6	TruthValue	read-write	If true, the condition is known to disrupt the normal service provided by the entity.
STR description	1.3.6.1.4.1.18070.2.9.2.1.1.7	String	read-write	Provides a description of the condition raised that may include context specific information.
notifications	1.3.6.1.4.1.18070.2.9.2.1.2
traps	1.3.6.1.4.1.18070.2.9.2.1.2.1
NTF eqptMissRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.1			Equipment Missing Raise
NTF eqptMissClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.2			Equipment Missing Clear
NTF eqptUnknRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.3			Equipment Unknown Raise
NTF eqptUnknClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.4			Equipment Unknown Clear
NTF eqptMismRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.5			Equipment Mismatch Raise
NTF eqptMismClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.6			Equipment Mismatch Clear
NTF eqptFailRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.7			Equipment Failed Raise
NTF eqptFailClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.8			Equipment Failed Clear
NTF eqptDgrdRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.9			Equipment Degrade Raise
NTF eqptDgrdClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.10			Equipment Degrade Clear
NTF eqptCommRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.11			Equipment Comms Raise
NTF eqptCommClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.12			Equipment Comms Clear
NTF upgrRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.13			Upgrade Raise
NTF upgrClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.14			Upgrade Clear
NTF lpbkRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.15			Loopback Operated Raise
NTF lpbkClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.16			Loopback Operated Clear
NTF losRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.17			Loss of Signal Raise
NTF losClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.18			Loss of Signal Clear
NTF lofRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.19			Loss of Frame Raise
NTF lofClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.20			Loss of Frame Clear
NTF loSyncRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.21			Loss of Synchronization Raise
NTF loSyncClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.22			Loss of Synchronization Clear
NTF lolaRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.23			Loss of Lane Alignment Raise
NTF lolaClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.24			Loss of Lane Alignment Clear
NTF lomRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.25			Loss of Multiframe Raise
NTF lomClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.26			Loss of Multiframe Clear
NTF timRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.27			Trace Identifier Mismatch Raise
NTF timClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.28			Trace Identifier Mismatch Clear
NTF sdRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.29			Signal Degrade Raise
NTF sdClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.30			Signal Degrade Clear
NTF bdiRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.31			Backward Defect Indication Raise
NTF bdiClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.32			Backward Defect Indication Clear
NTF pyldMismRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.33			Payload Mismatch Raise
NTF pyldMismClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.34			Payload Mismatch Clear
NTF odtgMismRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.35			ODTG Mismatch Raise
NTF odtgMismClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.36			ODTG Mismatch Clear
NTF ais_lRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.37			Alarm Indication Signal, Line Raise
NTF ais_lClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.38			Alarm Indication Signal, Line Clear
NTF ms_aisRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.39			Multiplex Section Alarm Indication Signal Raise
NTF ms_aisClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.40			Multiplex Section Alarm Indication Signal Clear
NTF otu_aisRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.41			OTU Alarm Indication Signal Raise
NTF otu_aisClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.42			OTU Alarm Indication Signal Clear
NTF odu_aisRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.43			ODU Alarm Indication Signal Raise
NTF odu_aisClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.44			ODU Alarm Indication Signal Clear
NTF lckRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.45			ODU Locked Raise
NTF lckClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.46			ODU Locked Clear
NTF ociRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.47			ODU Open Connection Indication Raise
NTF ociClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.48			ODU Open Connection Indication Clear
NTF highBerRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.49			High Bite Error Ratio Raise
NTF highBerClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.50			High Bit Error Ratio Clear
NTF lfRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.51			Local Fault Raise
NTF lfClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.52			Local Fault Clear
NTF rfRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.53			Remote Fault Raise
NTF rfClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.54			Remote Fault Clear
NTF rdi_lRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.55			Remote Defect Indication, Line Raise
NTF rdi_lClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.56			Remote Defect Indication, Line Clear
NTF ms_rdiRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.57			Multiplex Section Remote Defect Indication Raise
NTF ms_rdiClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.58			Multiplex Section Remote Defect Indication Clear
NTF oprHighThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.59			Optical Power Rx High Threshold Raise
NTF oprHighThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.60			Optical Power Rx High Threshold Clear
NTF oprLowThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.61			Optical Power Rx Low Threshold Raise
NTF oprLowThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.62			Optical Power Rx Low Threshold Clear
NTF optHighThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.63			Optical Power Tx High Threshold Raise
NTF optHighThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.64			Optical Power Tx High Threshold Clear
NTF optLowThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.65			Optical Power Tx Low Threshold Raise
NTF optLowThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.66			Optical Power Tx Low Threshold Clear
NTF laserTempHighThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.67			Tx Laser Above High Temperature Threshold Raise
NTF laserTempHighThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.68			Tx Laser Above High Temperature Threshold Clear
NTF laserTempLowThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.69			Tx Laser Below Low Temperature Threshold Raise
NTF laserTempLowThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.70			Tx Laser Below Low Temperature Threshold Clear
NTF laserFailRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.71			Tx Laser Fail Raise
NTF laserFailClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.72			Tx Laser Fail Clear
NTF cfgUnsuppRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.73			Configuration Unsupported Raise
NTF cfgUnsuppClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.74			Configuration Unsupported Clear
NTF cfgFailRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.75			Configuration Failure Raise
NTF cfgFailClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.76			Configuration Failure Clear
NTF lolightRxRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.77			Loss of light, receive Raise
NTF lolightRxClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.78			Loss of light, receive Clear
NTF lolightTxRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.79			Loss of light, transmit Raise
NTF lolightTxClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.80			Loss of light, transmit Clear
NTF feimRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.81			Far-end node identification mismatch Raise
NTF feimClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.82			Far-end node identification mismatch Clear
NTF feciRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.83			Far-end node configuration mismatch Raise
NTF feciClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.84			Far-end node configuration mismatch Clear
NTF contComSRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.85			Control comms failure, span section Raise
NTF contComSClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.86			Control comms failure, span section Clear
NTF contComERaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.87			Control comms failure, eqlz. section Raise
NTF contComEClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.88			Control comms failure, eqlz. section Clear
NTF loSpecRxRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.89			Loss out of specification, receive Raise
NTF loSpecRxClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.90			Loss out of specification, receive Clear
NTF tLossRxHtRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.91			Loss high threshold exceeded, receive Raise
NTF tLossRxHtClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.92			Loss high threshold exceeded, receive Clear
NTF iaocpRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.93			Invalid pre-amplifier operating cfg Raise
NTF iaocpClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.94			Invalid pre-amplifier operating cfg Clear
NTF iaocmRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.95			Invalid mid-amplifier operating cfg Raise
NTF iaocmClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.96			Invalid mid-amplifier operating cfg Clear
NTF iaocbRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.97			Invalid boost-amp. operating cfg Raise
NTF iaocbClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.98			Invalid boost-amp. operating cfg Clear
NTF apsdRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.99			Automatic power shutdown Raise
NTF apsdClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.100			Automatic power shutdown Clear
NTF pmiRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.101			Payload missing indication Raise
NTF pmiClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.102			Payload missing indication Clear
NTF uneqORaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.103			Optical channel unequipped Raise
NTF uneqOClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.104			Optical channel unequipped Clear
NTF aisORaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.105			Alarm indication signal, optical Raise
NTF aisOClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.106			Alarm indication signal, optical Clear
NTF posRxRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.107			Power out of specification, receive Raise
NTF posRxClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.108			Power out of specification, receive Clear
NTF posTxRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.109			Power out of specification, transmit Raise
NTF posTxClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.110			Power out of specification, transmit Clear
NTF obrosRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.111			Optical back reflection out of spec Raise
NTF obrosClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.112			Optical back reflection out of spec Clear
NTF chnDfcRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.113			Channel count deficiency Raise
NTF chnDfcClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.114			Channel count deficiency Clear
NTF replUnitDegradeRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.115			Replaceable unit degrade Raise
NTF replUnitDegradeClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.116			Replaceable unit degrade Clear
NTF cnxMeaRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.117			Connection Mismatch Raise
NTF cnxMeaClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.118			Connection Mismatch Clear
NTF cnxVldTmoutRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.119			Connection Validation Timeout Raise
NTF cnxVldTmoutClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.120			Connection Validation Timeout Clear
NTF posRxHighRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.121			Receive power out of spec, High Raise
NTF posRxHighClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.122			Receive power out of spec, High Clear
NTF posRxLowRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.123			Receive power out of spec, Low Raise
NTF posRxLowClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.124			Receive power out of spec, Low Clear
NTF oprHighFailRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.125			Optical Power Received High Fail Raise
NTF oprHighFailClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.126			Optical Power Received High Fail Clear
NTF obrHtRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.127			Optical back reflection high threshold exceeded Raise
NTF obrHtClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.128			Optical back reflection high threshold exceeded Clear
NTF aprRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.129			Automatic Power Reduction Raise
NTF aprClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.130			Automatic Power Reduction Clear
NTF modTempHighThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.131			Transceiver Module Above High Temperature Threshold Raise
NTF modTempHighThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.132			Transceiver Module Above High Temperature Threshold Clear
NTF modTempLowThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.133			Transceiver Module Below Low Temperature Threshold Raise
NTF modTempLowThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.134			Transceiver Module Below Low Temperature Threshold Clear
NTF modTempShutdownRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.135			Transceiver Module Temperature Shutdown Raise
NTF modTempShutdownClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.136			Transceiver Module Temperature Shutdown Clear
NTF envTempHighThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.137			Environment Above High Temperature Threshold Raise
NTF envTempHighThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.138			Environment Above High Temperature Threshold Clear
NTF envTempLowThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.139			Environment Below Low Temperature Threshold Raise
NTF envTempLowThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.140			Environment Below Low Temperature Threshold Clear
NTF envTempFailRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.141			Environment temperature failure Raise
NTF envTempFailClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.142			Environment temperature failure Clear
NTF envVoltHighThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.143			Environment Above High Voltage Threshold Raise
NTF envVoltHighThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.144			Environment Above High Voltage Threshold Clear
NTF envVoltLowThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.145			Environment Below Low Voltage Threshold Raise
NTF envVoltLowThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.146			Environment Below Low Voltage Threshold Clear
NTF envVoltFailRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.147			Environment voltage failure Raise
NTF envVoltFailClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.148			Environment voltage failure Clear
NTF scmNmiDownRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.149			SCM Network Management Interface down Raise
NTF scmNmiDownClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.150			SCM Network Management Interface down Clear
NTF scmNoNmConnRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.151			No Network Management Connectivity on both SCMs Raise
NTF scmNoNmConnClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.152			No Network Management Connectivity on both SCMs Clear
NTF eqptLatchOpenRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.153			Equipment Latch Open Raise
NTF eqptLatchOpenClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.154			Equipment Latch Open Clear
NTF powerAbsentRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.155			No Power available Raise
NTF powerAbsentClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.156			No Power available Clear
NTF fanSpeedLowThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.157			Fan speed below low threshold Raise
NTF fanSpeedLowThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.158			Fan speed below low threshold Clear
NTF nonCoLocatedControllerRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.159			Controllers are in different chassis Raise
NTF nonCoLocatedControllerClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.160			Controllers are in different chassis Clear
NTF preFecBerThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.161			Pre-FEC Bit Error Ratio Above High Threshold Raise
NTF preFecBerThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.162			Pre-FEC Bit Error Ratio Above High Threshold Clear
NTF firmUpgrdReqdRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.163			Firmware Upgrade Required Raise
NTF firmUpgrdReqdClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.164			Firmware Upgrade Required Clear
NTF otuBerThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.165			OTU Bit Error Ratio Above High Threshold Raise
NTF otuBerThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.166			OTU Bit Error Ratio Above High Threshold Clear
NTF oduBerThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.167			ODU Bit Error Ratio Above High Threshold Raise
NTF oduBerThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.168			ODU Bit Error Ratio Above High Threshold Clear
NTF pcsBerThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.169			PCS Bit Error Ratio Above High Threshold Raise
NTF pcsBerThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.170			PCS Bit Error Ratio Above High Threshold Clear
NTF berTh_sRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.171			Section Level Bit Error Ratio Above High Threshold Raise
NTF berTh_sClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.172			Section Level Bit Error Ratio Above High Threshold Clear
NTF berTh_lRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.173			Line Level Bit Error Ratio Above High Threshold Raise
NTF berTh_lClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.174			Line Level Bit Error Ratio Above High Threshold Clear
NTF rs_berThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.175			Regenerator Section Bit Error Ratio Above High Threshold Raise
NTF rs_berThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.176			Regenerator Section Bit Error Ratio Above High Threshold Clear
NTF ms_berThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.177			Multiplex Section Bit Error Ratio Above High Threshold Raise
NTF ms_berThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.178			Multiplex Section Bit Error Ratio Above High Threshold Clear
NTF oneCableDisconnectedRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.179			One Multichassis Cable Disconnected Raise
NTF oneCableDisconnectedClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.180			One Multichassis Cable Disconnected Clear
NTF envCurrentHighThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.181			High Current Threshold Required Raise
NTF envCurrentHighThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.182			High Current Threshold Requires Clear
NTF envCurrentLowThRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.183			Low Current Threshold Required Raise
NTF envCurrentLowThClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.184			Low Current Threshold Requires Clear
NTF prbsRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.185			PRBS test active
NTF prbsClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.186			PRBS test active cleared
NTF forcedRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.187			Forced protection switch Raise
NTF forcedClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.188			Forced protection switch Clear
NTF defRDICCMRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.189			Receiving RDI from remote MEP Raise
NTF defRDICCMClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.190			Receiving RDI from remote MEP Clear
NTF defMACStatusRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.191			Port status failure of remote MEP Raise
NTF defMACStatusClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.192			Port status failure of remote MEP Clear
NTF defRemoteCCMRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.193			Lost connection with remote MEP Raise
NTF defRemoteCCMClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.194			Lost connection with remote MEP Clear
NTF defErrorCCMRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.195			Receiving invalid CCM packet from remote MEP Raise
NTF defErrorCCMClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.196			Receiving invalid CCM packet from remote MEP Clear
NTF defXconCCMRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.197			Receiving cross connect CCMs Raise
NTF defXconCCMClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.198			Receiving cross connect CCMs Clear
NTF defBfdDownRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.199			BFD session down Raise
NTF defBfdDownClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.200			BFD session down Clear
NTF isisDbOvrldRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.201			ISIS Database Overloaded Raise
NTF isisDbOvrldClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.202			ISIS Database Overloaded Clear
NTF isisXDownRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.203			ISIS Circuit Down Raise
NTF isisXDownClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.204			ISIS Circuit Down Clear
NTF isisAdjDownRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.205			ISIS Adjacency Down Raise
NTF isisAdjDownClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.206			ISIS Adjacency Down Clear
NTF isisAdjRejectedRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.207			ISIS Adjacency Rejected Raise
NTF isisAdjRejectedClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.208			ISIS Adjacency Rejected Clear
NTF rsvpAdjDownRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.209			RSVP Adjacency Down Raise
NTF rsvpAdjDownClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.210			RSVP Adjacency Down Clear
NTF diskHighUsageRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.211			Disk High Usage Raise
NTF diskHighUsageClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.212			Disk High Usage Clear
NTF memHighUsageRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.213			Memory High Usage Raise
NTF memHighUsageClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.214			Memory High Usage Clear
NTF lockoutRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.215			Lockout protection switch Raise
NTF lockoutClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.216			Lockout protection switch Clear
NTF invUnknownRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.217			Inventory Unknown raise
NTF invUnknownClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.218			Inventory Unknown clear
NTF airfilterAbsenseRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.219			AirFilter Absense Raise
NTF airfilterAbsenseClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.220			AirFilter Absense Clear
NTF firmUpgrdFailRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.221			Shelf manager firmware upgrade failed Raise
NTF firmUpgrdFailClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.222			Shelf manager firmware upgrade failed Clear
NTF partitionFaultRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.223			Disk partition fault detected Raise
NTF partitionFaultClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.224			Disk partition fault detected Clear
NTF lolckRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.225			Loss of Lock Raise
NTF lolckClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.226			Loss of Lock Clear
NTF inventoryUnsuppRaise	1.3.6.1.4.1.18070.2.9.2.1.2.1.227			Inventory Item Unsupported Raise
NTF inventoryUnsuppClear	1.3.6.1.4.1.18070.2.9.2.1.2.1.228			Inventory Item Unsupported Clear

RFC description

Defines active alarms, conditions, and notification data for the BTI7800 system management.

Start monitoring BTI Systems BTI7800 optical transport network node with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BTI7800-NOTIFICATIONS-MIB

What Is BTI7800-NOTIFICATIONS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description