All MIBs › BROCADE-MCT-CLUSTER-MIB › brcdMctClusterDeployFailureReason
brcdMctClusterDeployFailureReason
Module: BROCADE-MCT-CLUSTER-MIB
OID (symbolic): BROCADE-MCT-CLUSTER-MIB::brcdMctClusterDeployFailureReason
OID (numeric): 1.3.6.1.4.1.1991.1.1.12.1.1.2.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The last failure reason for cluster deploy operation through SNMP. The following failure reason codes are supported: none(1) - The last deploy is successful. unknown(2) - The last deploy has failed for unknown reason. rBridgeIdNotConfigured(3) - Remote bridge id is not configured. sessionVlanNotConfigured(4) - Session VLAN is not configured. iclNotConfigured(5) - ICL is not configured. peerNotConfigured(6) - Peer is not configured. iclIsMrpSecondaryInterface(7) - In NI CES/CER devices, ICL should not be MRP secondary interface. iclIsErpRplInterface(8) - In NI CES/CER devices, ICL should not be ERP RPL interface. iclIsErpMsInterface(9) - In NI CES/CER devices, ICL should not be ERP MS interface. iclIsErpFsInterface(10) - In NI CES/CER devices, ICL should not be ERP FS interface. iclNotInSessionVlan(11) - ICL is not in session VLAN. iclNotInMemberVlans(12) - ICL is not in member VLANs. nonIclInterfacesInSessionVlan(13) - Non ICL interfaces are present under session VLAN. mgmtVeNotConfiguredInSessionVlan(14) - Management VE is not configured in session VLAN. mgmtIpNotConfiguredInSessionVlan(15) - Management IP is not configured in session VLAN. mgmtIpIsUsedInPeerOrClientConfig(16) - Management IP is used in peer or client configuration. mgmtIpNotInSubnetOfPeerIp(17) - Management IP is not in subnet of peer IP. rBridgeIdUsedInPeerOrClientConfig(18) - Remote bridge id is used in peer or client configuration. clientInterfaceIsNotInMemberVlan(19) - Client interface is not in member VLAN. defaultVlanConfigAsSessOrMemberVlan(20) - Default VLAN is configured as session or member VLAN.
What is brcdMctClusterDeployFailureReason?
Reports the reason code explaining why the most recent SNMP-initiated cluster deploy operation failed. A value of none(1) indicates the last deploy was successful.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1991.1.1.12.1.1.2.1.11 snmpwalk -v2c -c public <target> BROCADE-MCT-CLUSTER-MIB::brcdMctClusterDeployFailureReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1991.1.1.12.1.1.2.1.11.1 snmpget -v2c -c public <target> BROCADE-MCT-CLUSTER-MIB::brcdMctClusterDeployFailureReason.1
Start monitoring Brocade NetIron XMR/MLX CES/CER chassis routers and switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BROCADE-MCT-CLUSTER-MIB::brcdMctClusterDeployFailureReason OID value, configure state conditions and alerts, and monitor any Brocade NetIron XMR/MLX CES/CER chassis routers and switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1991 | foundry | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1 | products | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1.1 | switch | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1.1.12 | brcdMct | FOUNDRY-SN-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1991.1.1.12.1 | brcdMctMIB | BROCADE-MCT-CLUSTER-MIB |
| 1.3.6.1.4.1.1991.1.1.12.1.1 | brcdMctObjects | BROCADE-MCT-CLUSTER-MIB |
| 1.3.6.1.4.1.1991.1.1.12.1.1.2 | brcdMctClusterTable | BROCADE-MCT-CLUSTER-MIB |
| 1.3.6.1.4.1.1991.1.1.12.1.1.2.1 | brcdMctClusterEntry | BROCADE-MCT-CLUSTER-MIB |
| 1.3.6.1.4.1.1991.1.1.12.1.1.2.1.11 | brcdMctClusterDeployFailureReason | BROCADE-MCT-CLUSTER-MIB |