All MIBs › BREEZECOM-MIB › brzIpFilter

brzIpFilter

OID (symbolic): BREEZECOM-MIB::brzIpFilter

OID (numeric): 1.3.6.1.4.1.710.3.2.1.2.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Setting the value of this attribute to ON will cause the system to filter all non-IP traffic to the Wireless LAN. This should be used on environments where only IP (and ARP) traffic is permitted.

What is brzIpFilter?

This read-write switch, when enabled, causes the device to filter out all non-IP (and non-ARP) traffic sent to the Wireless LAN, restricting the link to IP traffic only.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.710.3.2.1.2.4
snmpwalk -v2c -c public <target> BREEZECOM-MIB::brzIpFilter

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.710.3.2.1.2.4.1
snmpget -v2c -c public <target> BREEZECOM-MIB::brzIpFilter.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.710.3.2.1.2.4.1 i <value>

Start monitoring BreezeCOM (Alvarion) wireless bridges/fixed wireless radios (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BREEZECOM-MIB::brzIpFilter OID value, configure state conditions and alerts, and monitor any BreezeCOM (Alvarion) wireless bridges/fixed wireless radios (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.710	breezecom	BREEZECOM-MIB
1.3.6.1.4.1.710.3	breezecomPrvRev	BREEZECOM-MIB
1.3.6.1.4.1.710.3.2	brznetmib	BREEZECOM-MIB
1.3.6.1.4.1.710.3.2.1	brzSys	BREEZECOM-MIB
1.3.6.1.4.1.710.3.2.1.2	sysParams	BREEZECOM-MIB
1.3.6.1.4.1.710.3.2.1.2.4	brzIpFilter	BREEZECOM-MIB

BREEZECOM-MIB :: brzIpFilter

brzIpFilter

Module

This MIB depends on