All MIBs › BLADETYPE6-NETWORK-MIB › ripNewCfgStaticAddOutRmap
ripNewCfgStaticAddOutRmap
Module: BLADETYPE6-NETWORK-MIB
OID (symbolic): BLADETYPE6-NETWORK-MIB::ripNewCfgStaticAddOutRmap
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.1.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The route map to be add into out-rmap list. When read, 0 is returned.
What is ripNewCfgStaticAddOutRmap?
Used to add a route map to the outbound route map list for static routes in the pending RIP configuration by writing the route map index to this object. Reading it always returns 0, as it is a write-only action field.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.1.7 snmpwalk -v2c -c public <target> BLADETYPE6-NETWORK-MIB::ripNewCfgStaticAddOutRmap
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.1.7.1 snmpget -v2c -c public <target> BLADETYPE6-NETWORK-MIB::ripNewCfgStaticAddOutRmap.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.1.7.1 i <value>
Start monitoring HP BladeSystem Type 6 / ProLiant GbE2c 10G Interconnect Switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE6-NETWORK-MIB::ripNewCfgStaticAddOutRmap OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 6 / ProLiant GbE2c 10G Interconnect Switch from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33 | hpSwitchProliant | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33.6 | hpSwitchModuleBladetype6 | HP-SWITCH-PL-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.6.2 | hpSwitchBladeType6_Mgmt | HP-SWITCH-PL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3 | layer3 | BLADETYPE6-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1 | layer3Configs | BLADETYPE6-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18 | rip2Cfg | BLADETYPE6-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4 | ripRouteRedistribution | BLADETYPE6-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.1 | ripRedistributeStatic | BLADETYPE6-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.1.7 | ripNewCfgStaticAddOutRmap | BLADETYPE6-NETWORK-MIB |