All MIBs › BLADETYPE6-NETWORK-MIB › ripNewCfgEospfRemoveOutRmap
ripNewCfgEospfRemoveOutRmap
Module: BLADETYPE6-NETWORK-MIB
OID (symbolic): BLADETYPE6-NETWORK-MIB::ripNewCfgEospfRemoveOutRmap
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.6.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The route map to be removed from out-rmap list. When read, 0 is returned.
What is ripNewCfgEospfRemoveOutRmap?
Used to remove a route map from the OSPF outbound route map list in the pending RIP configuration by writing the index of the route map to remove. Reading this object always returns 0, as it is a write-only action trigger.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.6.8 snmpwalk -v2c -c public <target> BLADETYPE6-NETWORK-MIB::ripNewCfgEospfRemoveOutRmap
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.6.8.1 snmpget -v2c -c public <target> BLADETYPE6-NETWORK-MIB::ripNewCfgEospfRemoveOutRmap.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.6.8.1 i <value>
Start monitoring HP BladeSystem Type 6 / ProLiant GbE2c 10G Interconnect Switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE6-NETWORK-MIB::ripNewCfgEospfRemoveOutRmap OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 6 / ProLiant GbE2c 10G Interconnect Switch from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33 | hpSwitchProliant | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33.6 | hpSwitchModuleBladetype6 | HP-SWITCH-PL-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.6.2 | hpSwitchBladeType6_Mgmt | HP-SWITCH-PL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3 | layer3 | BLADETYPE6-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1 | layer3Configs | BLADETYPE6-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18 | rip2Cfg | BLADETYPE6-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4 | ripRouteRedistribution | BLADETYPE6-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.6 | ripRedistributeEospf | BLADETYPE6-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.6.8 | ripNewCfgEospfRemoveOutRmap | BLADETYPE6-NETWORK-MIB |