BLADETYPE6-NETWORK-MIB :: agSaveConfiguration

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBLADETYPE6-NETWORK-MIBagSaveConfiguration

agSaveConfiguration

Module: BLADETYPE6-NETWORK-MIB

OID (symbolic): BLADETYPE6-NETWORK-MIB::agSaveConfiguration

OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This is an action object to write current configuration to nonvolatile storage.

When issued with the saveActive, the active configuration in flash is saved to backup in flash and then the new configuration is saved to the active configuration in flash.

When issued with notSaveActive, the active configuration is NOT saved to the flash and the active configuration is overwritten with the new configuration.

ok(1) is returned always when read.

What is agSaveConfiguration?

An action object that writes the current running configuration to non-volatile flash storage; when triggered with saveActive, the active flash config is first backed up before the new configuration is saved.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.4
snmpwalk -v2c -c public <target> BLADETYPE6-NETWORK-MIB::agSaveConfiguration

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.4.1
snmpget -v2c -c public <target> BLADETYPE6-NETWORK-MIB::agSaveConfiguration.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.4.1 i <value>

Start monitoring HP BladeSystem Type 6 / ProLiant GbE2c 10G Interconnect Switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE6-NETWORK-MIB::agSaveConfiguration OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 6 / ProLiant GbE2c 10G Interconnect Switch from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.3hpsystemCLJ8500-MIB
1.3.6.1.4.1.11.2.3.7netElementHP-ICF
1.3.6.1.4.1.11.2.3.7.11hpEtherSwitchHP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33hpSwitchProliantHP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33.6hpSwitchModuleBladetype6HP-SWITCH-PL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.6.2hpSwitchBladeType6_MgmtHP-SWITCH-PL-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.3.7.11.33.6.2.1agentBLADETYPE6-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1agentConfigBLADETYPE6-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1agSystemBLADETYPE6-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.4agSaveConfigurationBLADETYPE6-NETWORK-MIB