BLADETYPE6-NETWORK-MIB :: agApplyConfiguration

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBLADETYPE6-NETWORK-MIBagApplyConfiguration

agApplyConfiguration

Module: BLADETYPE6-NETWORK-MIB

OID (symbolic): BLADETYPE6-NETWORK-MIB::agApplyConfiguration

OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply are written to the new_config block.

other(1) is returned when this object ie read.

What is agApplyConfiguration?

An action object used to commit pending configuration changes on the switch; setting it to apply(2) writes all changes made since the last apply operation to the new configuration block.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.2
snmpwalk -v2c -c public <target> BLADETYPE6-NETWORK-MIB::agApplyConfiguration

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.2.1
snmpget -v2c -c public <target> BLADETYPE6-NETWORK-MIB::agApplyConfiguration.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.2.1 i <value>

Start monitoring HP BladeSystem Type 6 / ProLiant GbE2c 10G Interconnect Switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE6-NETWORK-MIB::agApplyConfiguration OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 6 / ProLiant GbE2c 10G Interconnect Switch from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.3hpsystemCLJ8500-MIB
1.3.6.1.4.1.11.2.3.7netElementHP-ICF
1.3.6.1.4.1.11.2.3.7.11hpEtherSwitchHP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33hpSwitchProliantHP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33.6hpSwitchModuleBladetype6HP-SWITCH-PL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.6.2hpSwitchBladeType6_MgmtHP-SWITCH-PL-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.3.7.11.33.6.2.1agentBLADETYPE6-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1agentConfigBLADETYPE6-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1agSystemBLADETYPE6-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.2agApplyConfigurationBLADETYPE6-NETWORK-MIB