All MIBs › BLADETYPE6-NETWORK-MIB › aclNewCfgEgressPorts

aclNewCfgEgressPorts

OID (symbolic): BLADETYPE6-NETWORK-MIB::aclNewCfgEgressPorts

OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.29

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: The port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:

   OCTET 1  OCTET 2  .....
   xxxxxxxx xxxxxxxx .....
   ||    || |
   ||    || |_ port 9
   ||    ||
   ||    ||___ port 8
   ||    |____ port 7
   ||      .    .   .
   ||_________ port 2
   |__________ port 1

where x:
   1 - the represented port is configured for filtering.
   0 - the represented port is not configured for filtering.

What is aclNewCfgEgressPorts?

Reports the read-only bitmap of switch ports configured for egress (outbound) traffic filtering in this ACL entry. Each bit in the bitmap corresponds to a specific port that the ACL applies to on the egress side.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.29
snmpwalk -v2c -c public <target> BLADETYPE6-NETWORK-MIB::aclNewCfgEgressPorts

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.29.1
snmpget -v2c -c public <target> BLADETYPE6-NETWORK-MIB::aclNewCfgEgressPorts.1

Start monitoring HP BladeSystem Type 6 / ProLiant GbE2c 10G Interconnect Switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE6-NETWORK-MIB::aclNewCfgEgressPorts OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 6 / ProLiant GbE2c 10G Interconnect Switch from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.11	hp	CLJ8500-MIB
1.3.6.1.4.1.11.2	nm	CLJ8500-MIB
1.3.6.1.4.1.11.2.3	hpsystem	CLJ8500-MIB
1.3.6.1.4.1.11.2.3.7	netElement	HP-ICF
1.3.6.1.4.1.11.2.3.7.11	hpEtherSwitch	HP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33	hpSwitchProliant	HP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33.6	hpSwitchModuleBladetype6	HP-SWITCH-PL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.6.2	hpSwitchBladeType6_Mgmt	HP-SWITCH-PL-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.11.2.3.7.11.33.6.2.9	acl	BLADETYPE6-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1	acConfig	BLADETYPE6-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1	acList	BLADETYPE6-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2	aclNewCfgTable	BLADETYPE6-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1	aclNewCfgEntry	BLADETYPE6-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.29	aclNewCfgEgressPorts	BLADETYPE6-NETWORK-MIB

BLADETYPE6-NETWORK-MIB :: aclNewCfgEgressPorts

aclNewCfgEgressPorts

Module

This MIB depends on