BKTEL-HFC862-OVTX-V11-MIB :: ovtxConfigurationRfInputAlarmMode

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBKTEL-HFC862-OVTX-V11-MIBovtxConfigurationRfInputAlarmMode

ovtxConfigurationRfInputAlarmMode

Module: BKTEL-HFC862-OVTX-V11-MIB

OID (symbolic): BKTEL-HFC862-OVTX-V11-MIB::ovtxConfigurationRfInputAlarmMode

OID (numeric): 1.3.6.1.4.1.7501.1.2.101.3.1.1.33

Node type: OBJECT-TYPE

Type: RfInputAlarmMode

Access: read-write

Description: The RF input alarm mode (Can be used to disable alarms of unused RF inputs) Only usable if ovtxDisplayRfInputCapabilities == rfInputCatvAndSatSupported(3), otherwise always reports alarmEnableAll(1)

What is ovtxConfigurationRfInputAlarmMode?

Controls which RF input's alarms are active on a dual-input transmitter: all alarms enabled, CATV alarms enabled with SAT alarms disabled, or the reverse. This lets an admin silence alarms for whichever input isn't actually connected on a device supporting both CATV and SAT; on devices that don't support both inputs it always reports all alarms enabled.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7501.1.2.101.3.1.1.33
snmpwalk -v2c -c public <target> BKTEL-HFC862-OVTX-V11-MIB::ovtxConfigurationRfInputAlarmMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.7501.1.2.101.3.1.1.33.1
snmpget -v2c -c public <target> BKTEL-HFC862-OVTX-V11-MIB::ovtxConfigurationRfInputAlarmMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.7501.1.2.101.3.1.1.33.1 s <value>

Start monitoring BKTEL HFC-862 optical node equipment (HFC cable plant) (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BKTEL-HFC862-OVTX-V11-MIB::ovtxConfigurationRfInputAlarmMode OID value, configure state conditions and alerts, and monitor any BKTEL HFC-862 optical node equipment (HFC cable plant) (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.7501bktelSystemsBKTEL-HFC862-BASE-MIB
1.3.6.1.4.1.7501.1hfcBKTEL-HFC862-BASE-MIB
1.3.6.1.4.1.7501.1.2modulesBKTEL-HFC862-BASE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.7501.1.2.101ovtxBKTEL-HFC862-OVTX-V11-MIB
1.3.6.1.4.1.7501.1.2.101.3ovtxConfigurationBKTEL-HFC862-OVTX-V11-MIB
1.3.6.1.4.1.7501.1.2.101.3.1ovtxConfigurationTableBKTEL-HFC862-OVTX-V11-MIB
1.3.6.1.4.1.7501.1.2.101.3.1.1ovtxConfigurationEntryBKTEL-HFC862-OVTX-V11-MIB
1.3.6.1.4.1.7501.1.2.101.3.1.1.33ovtxConfigurationRfInputAlarmModeBKTEL-HFC862-OVTX-V11-MIB