All MIBs › BKTEL-HFC862-NECE-MIB › neceConfigTrapAccumulationTime
neceConfigTrapAccumulationTime
Module: BKTEL-HFC862-NECE-MIB
OID (symbolic): BKTEL-HFC862-NECE-MIB::neceConfigTrapAccumulationTime
OID (numeric): 1.3.6.1.4.1.7501.1.2.100.3.1.1.64
Node type: OBJECT-TYPE
Type: TrapAccumulationTimeValue
Access: read-write
Description: Time in seconds that the NECE waits before sending all pending traps. NOTE: There are two condition where the NECE sends its pending traps earlier ignoring this accumulation time (of course verifying first): 1) The NECE's internal trap buffer is 3/4 full 2) The NECE's SNMP agent is polled by a request from manager !!! Only valid if neceConfigTrapReceiverVerify == true(1) !!!
What is neceConfigTrapAccumulationTime?
The time, in seconds (0-60), that the NECE waits and batches up pending traps before sending them all together, after first performing the sysDescr verification. It will send earlier than this timeout if its internal trap buffer reaches three-quarters full or if its SNMP agent gets polled by a manager, and the setting only applies when neceConfigTrapReceiverVerify is true.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7501.1.2.100.3.1.1.64 snmpwalk -v2c -c public <target> BKTEL-HFC862-NECE-MIB::neceConfigTrapAccumulationTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7501.1.2.100.3.1.1.64.1 snmpget -v2c -c public <target> BKTEL-HFC862-NECE-MIB::neceConfigTrapAccumulationTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7501.1.2.100.3.1.1.64.1 s <value>
Start monitoring BKtel optical network elements with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BKTEL-HFC862-NECE-MIB::neceConfigTrapAccumulationTime OID value, configure state conditions and alerts, and monitor any BKtel optical network elements from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7501 | bktelSystems | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.4.1.7501.1 | hfc | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.4.1.7501.1.2 | modules | BKTEL-HFC862-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7501.1.2.100 | nece | BKTEL-HFC862-NECE-MIB |
| 1.3.6.1.4.1.7501.1.2.100.3 | neceConfiguration | BKTEL-HFC862-NECE-MIB |
| 1.3.6.1.4.1.7501.1.2.100.3.1 | neceConfigurationTable | BKTEL-HFC862-NECE-MIB |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1 | neceConfigurationEntry | BKTEL-HFC862-NECE-MIB |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.64 | neceConfigTrapAccumulationTime | BKTEL-HFC862-NECE-MIB |