All MIBs › BESTPOWER-MIB › upsOutputCurrent2
upsOutputCurrent2
Module: BESTPOWER-MIB
OID (symbolic): BESTPOWER-MIB::upsOutputCurrent2
OID (numeric): 1.3.6.1.4.1.2947.1.4.10.4
Node type: OBJECT-TYPE
Type: NonNegativeInteger
Access: read-only
Description: The output current of the UPS expressed in 1/10 AC Amperes.
What is upsOutputCurrent2?
Reports the UPS output current on phase 2, in tenths of an AC ampere, as a read-only value.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2947.1.4.10.4 snmpwalk -v2c -c public <target> BESTPOWER-MIB::upsOutputCurrent2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2947.1.4.10.4.1 snmpget -v2c -c public <target> BESTPOWER-MIB::upsOutputCurrent2.1
Start monitoring Best Power UPS systems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BESTPOWER-MIB::upsOutputCurrent2 OID value, configure state conditions and alerts, and monitor any Best Power UPS systems from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2947 | bestPower | BESTPOWER-MIB |
| 1.3.6.1.4.1.2947.1 | bestLink | BESTPOWER-MIB |
| 1.3.6.1.4.1.2947.1.4 | upsOutput | BESTPOWER-MIB |
| 1.3.6.1.4.1.2947.1.4.10 | upsOutputPhase2 | BESTPOWER-MIB |
| 1.3.6.1.4.1.2947.1.4.10.4 | upsOutputCurrent2 | BESTPOWER-MIB |