All MIBs › BASEBRDD-MIB › deviceFlagsAtt5
deviceFlagsAtt5
Module: BASEBRDD-MIB
OID (symbolic): BASEBRDD-MIB::deviceFlagsAtt5
OID (numeric): 1.3.6.1.4.1.412.2.4.38.1.5
Node type: OBJECT-TYPE
Type: DmiInteger
Access: read-only
Description: Device flags from config manager info. Bit 0: 1 = device has been initialized, Bit 1: 1 = device is enabled, Bit 2: 1 = device config has been locked, Bit 3: 1 = device has temporary config resources assigned, Bit 4: 1 = device is reconfigurable
What is deviceFlagsAtt5?
Reports a set of status/configuration flag bits associated with a device entry in the base board device table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.412.2.4.38.1.5 snmpwalk -v2c -c public <target> BASEBRDD-MIB::deviceFlagsAtt5
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.412.2.4.38.1.5.1 snmpget -v2c -c public <target> BASEBRDD-MIB::deviceFlagsAtt5.1
Start monitoring Dell server/network appliance hardware (baseboard management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BASEBRDD-MIB::deviceFlagsAtt5 OID value, configure state conditions and alerts, and monitor any Dell server/network appliance hardware (baseboard management) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.412 | dmtf | BASEBRDD-MIB |
| 1.3.6.1.4.1.412.2 | dmtfStdMifs | BASEBRDD-MIB |
| 1.3.6.1.4.1.412.2.4 | dmtfSystemsMIF | BASEBRDD-MIB |
| 1.3.6.1.4.1.412.2.4.38 | dMTFSystemResourceDeviceInfoTable | BASEBRDD-MIB |
| 1.3.6.1.4.1.412.2.4.38.1 | dMTFSystemResourceDeviceInfoEntry | BASEBRDD-MIB |
| 1.3.6.1.4.1.412.2.4.38.1.5 | deviceFlagsAtt5 | BASEBRDD-MIB |