All MIBs › AtiL2-MIB › atiL2QOSStatus
atiL2QOSStatus
Module: AtiL2-MIB
OID (symbolic): AtiL2-MIB::atiL2QOSStatus
OID (numeric): 1.3.6.1.4.1.207.8.33.12.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If the QOS status is enabled, then QOS packets will be assigned to high or low priority queue. If it is disabled, packets works normally.(Applicable only to at-8326GB, at-9410GB and at-8350GB)
What is atiL2QOSStatus?
A read-write switch that enables or disables Quality of Service packet prioritization on certain switch models, so packets are assigned to high or low priority queues when enabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.33.12.1 snmpwalk -v2c -c public <target> AtiL2-MIB::atiL2QOSStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.33.12.1.1 snmpget -v2c -c public <target> AtiL2-MIB::atiL2QOSStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.33.12.1.1 i <value>
Start monitoring Allied Telesyn/Allied Telesis Layer 2 Ethernet switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AtiL2-MIB::atiL2QOSStatus OID value, configure state conditions and alerts, and monitor any Allied Telesyn/Allied Telesis Layer 2 Ethernet switches (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.33 | atiL2Mib | AtiL2-MIB |
| 1.3.6.1.4.1.207.8.33.12 | atiL2QOSConfigGroup | AtiL2-MIB |
| 1.3.6.1.4.1.207.8.33.12.1 | atiL2QOSStatus | AtiL2-MIB |