All MIBs › AtiL2-MIB › atiL2MirrorState
atiL2MirrorState
Module: AtiL2-MIB
OID (symbolic): AtiL2-MIB::atiL2MirrorState
OID (numeric): 1.3.6.1.4.1.207.8.33.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: if the state of Mirroring is enabled by selecting one of the two values , then the Mirroring explained above works. If disabled, port operation works normally. No Traffic gets routed from MirroringSourcePort to Destination Mirrored Port.
What is atiL2MirrorState?
Enables or disables port mirroring; when disabled, ports operate normally with no traffic copied from the source to destination mirror port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.33.1.8 snmpwalk -v2c -c public <target> AtiL2-MIB::atiL2MirrorState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.33.1.8.1 snmpget -v2c -c public <target> AtiL2-MIB::atiL2MirrorState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.33.1.8.1 i <value>
Start monitoring Allied Telesyn/Allied Telesis Layer 2 Ethernet switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AtiL2-MIB::atiL2MirrorState OID value, configure state conditions and alerts, and monitor any Allied Telesyn/Allied Telesis Layer 2 Ethernet switches (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.33 | atiL2Mib | AtiL2-MIB |
| 1.3.6.1.4.1.207.8.33.1 | atiL2GlobalGroup | AtiL2-MIB |
| 1.3.6.1.4.1.207.8.33.1.8 | atiL2MirrorState | AtiL2-MIB |