All MIBs › AtiL2-MIB › atiL2CurrentIpAddress
atiL2CurrentIpAddress
Module: AtiL2-MIB
OID (symbolic): AtiL2-MIB::atiL2CurrentIpAddress
OID (numeric): 1.3.6.1.4.1.207.8.33.2.1
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-only
Description: The Current IP address is the one which is currently used and is obtained dynamically through one of the protocols interaction.( DHCP or Bootp.) This address is NULL if the Address is Statically configured.
What is atiL2CurrentIpAddress?
Shows the IP address currently in use by the device, which was obtained dynamically via DHCP or BOOTP; it is empty/null if the device uses a static address instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.33.2.1 snmpwalk -v2c -c public <target> AtiL2-MIB::atiL2CurrentIpAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.33.2.1.1 snmpget -v2c -c public <target> AtiL2-MIB::atiL2CurrentIpAddress.1
Start monitoring Allied Telesyn/Allied Telesis Layer 2 Ethernet switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AtiL2-MIB::atiL2CurrentIpAddress OID value, configure state conditions and alerts, and monitor any Allied Telesyn/Allied Telesis Layer 2 Ethernet switches (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.33 | atiL2Mib | AtiL2-MIB |
| 1.3.6.1.4.1.207.8.33.2 | atiL2IpGroup | AtiL2-MIB |
| 1.3.6.1.4.1.207.8.33.2.1 | atiL2CurrentIpAddress | AtiL2-MIB |